EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Patient-specific 3D-printed Splint for Mallet Finger Injury

Ali Zolfagharian, Timothy M Gregory, Mahdi Bodaghi, Saleh Gharaie, Pearse Fay

International Journal of Bioprinting · 02.08.2024 · 6 (2) · 259

DOI: 10.18063/ijb.v6i2.259 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Bioprinting, online erschienen am 02.08.2024. Verfasst von Ali Zolfagharian und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Engineering, Deakin University, Geelong 3216, Australia. Die Arbeit wurde bisher 42-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Despite the frequency of mallet finger injuries, treatment options can often be costly, time-consuming, and ill-fitted. Three-dimensional (3D) printing allows for the production of highly customized and inexpensive splints, which suggests potential efficacy in the prescription of casts for musculoskeletal injuries. This study explores how the use of engineering concepts such as 3D printing and topology optimization (TO) can improve outcomes for patients. 3D printing enables the direct fabrication of the patient-specific complex shapes while utilizing finite element analysis and TO in the design of the splint allowed for the most efficient distribution of material to achieve mechanical requirements while reducing the amount of material used. The reduction in used material leads to significant improvements in weight reduction and heat dissipation, which would improve breathability and less sweating for the patient, greatly increasing comfort for the duration of their recovery.

Schlagwörter

Stichwörter der Autor:innen

Patient-specificSplintThree-dimensional printingTopology optimization

Autor:innen und Institutionen

  • School of Engineering, Deakin University, Geelong 3216, Australia.
  • Department of Engineering, School of Science and Technology, Nottingham Trent University, Nottingham NG11 8NS, UK.
  • School of Health and Social Development, Deakin University, Geelong 3220, Australia.

Zitieren

APA

Zolfagharian, A., Gregory, T. M., Bodaghi, M., Gharaie, S., & Fay, P. (2024). Patient-specific 3D-printed Splint for Mallet Finger Injury. International Journal of Bioprinting, 6(2), 259. https://doi.org/10.18063/ijb.v6i2.259

Vancouver

Zolfagharian A, Gregory TM, Bodaghi M, Gharaie S, Fay P. Patient-specific 3D-printed Splint for Mallet Finger Injury. International Journal of Bioprinting. 2024;6(2):259. doi:10.18063/ijb.v6i2.259

BibTeX
@article{Zolfagharian2024,
  author = {Zolfagharian, Ali and Gregory, Timothy M and Bodaghi, Mahdi and Gharaie, Saleh and Fay, Pearse},
  title = {Patient-specific 3D-printed Splint for Mallet Finger Injury},
  journal = {International Journal of Bioprinting},
  year = {2024},
  volume = {6},
  number = {2},
  pages = {259},
  doi = {10.18063/ijb.v6i2.259}
}
Kostenlos starten →