EUVIMEDEUVIMED entdecken
Crossref

SUSTAINABLE TURNING PERFORMANCE OF AISI 6150 STEEL USING MICRO-TEXTURED ALTISIN TOOLS UNDER RADIATOR COOLANT BASED MQL

Sarita Mishra, Sudhansu Ranjan Das, Santosh Kumar Sahu

International Journal of Advanced Research · 30.04.2026 · 14 (04) · 152-158

DOI: 10.21474/ijar01/23322 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Advanced Research, online erschienen am 30.04.2026. Verfasst von Sarita Mishra und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The present research explores the machinability of AISI 6150 chromium vanadium steel when it is being turned using micro-textured AlTiSiN-coated carbide inserts under Minimal Quantity Lubrication (MQL) conditions with automotive radiator coolant. Textures of micro-channels and micro-pits were created on the tool rake face to increase tribological behavior. A series of comparative experiments were carried out with non-textured tools at different cutting parameters. The findings show that textured tools large-scale minimize cutting temperature (down to about 25 C), tool wear, and friction and enhance surface finish and tool life. It is believed that these enhancements are due to decreased tool-chip contact area, increased lubricant retention and better heat dissipation. MQL with radiator coolant can also offer a low-cost and greener alternative to the conventional cooling methods and the cost of machining will be lowered by approximately 9%.

Zitieren

APA

Mishra, S., Das, S. R., & Sahu, S. K. (2026). SUSTAINABLE TURNING PERFORMANCE OF AISI 6150 STEEL USING MICRO-TEXTURED ALTISIN TOOLS UNDER RADIATOR COOLANT BASED MQL. International Journal of Advanced Research, 14(04), 152-158. https://doi.org/10.21474/ijar01/23322

Vancouver

Mishra S, Das SR, Sahu SK. SUSTAINABLE TURNING PERFORMANCE OF AISI 6150 STEEL USING MICRO-TEXTURED ALTISIN TOOLS UNDER RADIATOR COOLANT BASED MQL. International Journal of Advanced Research. 2026;14(04):152-158. doi:10.21474/ijar01/23322

BibTeX
@article{Mishra2026,
  author = {Mishra, Sarita and Das, Sudhansu Ranjan and Sahu, Santosh Kumar},
  title = {SUSTAINABLE TURNING PERFORMANCE OF AISI 6150 STEEL USING MICRO-TEXTURED ALTISIN TOOLS UNDER RADIATOR COOLANT BASED MQL},
  journal = {International Journal of Advanced Research},
  year = {2026},
  volume = {14},
  number = {04},
  pages = {152--158},
  doi = {10.21474/ijar01/23322}
}
Kostenlos starten →