Sustainable micro-milling of AISI H13 steel: Assessing copaiba oil as an eco-friendly lubricant in MQL-based micro-channel fabrication
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science · 2026-05 · 240 (10) · 3545-3561
DOI: 10.1177/09544062261416732 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, online erschienen am 09.02.2026. Verfasst von Tamires Isabela Mesquita Botelho und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 57 Literaturangaben.
Abstract (Originalsprache)
The movement toward sustainable manufacturing has heightened the necessity for eco-friendly cutting fluids, which reduce environmental hazards and health risks for machine operators. Although plant-based oils have shown promise as alternatives to traditional mineral-based fluids, their application in precision micro-machining has not been extensively studied. This research investigates, for the first time, the use of copaiba oil – a medicinal plant-based oil known for its anti-inflammatory and antimicrobial properties – as a sustainable cutting fluid in minimum quantity lubrication (MQL)-assisted micro-milling of AISI H13 tool steel. A comparative evaluation is performed against Quimatic synthetic oil and Vascomill vegetable-based oil, with a focus on tribological performance, tool wear, and micro-channel integrity. Using TiAlN-coated carbide micro-endmills (diameter: 400 µm), micro-channels were produced under controlled cutting conditions (cutting speed: 50.26 m/min, feed per tooth: 5 μm, depth of cut: 40 μm). Surface characterization using scanning electron microscopy (SEM) revealed that copaiba oil reduced burr formation while maintaining surface roughness (Ra: 0.05–0.08 μm) comparable to its commercial counterparts, despite higher tool wear. These results provide new insights into the potential of medicinal oils as sustainable lubricants for precision micro-machining. Additionally, the study highlights the potential for incorporating green tribology into micro-manufacturing, addressing both environmental and industrial sustainability. Thus, this research advances environmentally friendly manufacturing solutions, aligning with the aims of green precision engineering.
Zitieren
APA
Botelho, T. I. M., Davis, R., Pereira, R. B. D., Silva, M. B. D., & Singh, A. (2026). Sustainable micro-milling of AISI H13 steel: Assessing copaiba oil as an eco-friendly lubricant in MQL-based micro-channel fabrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 240(10), 3545-3561. https://doi.org/10.1177/09544062261416732
Vancouver
Botelho TIM, Davis R, Pereira RBD, Silva MBD, Singh A. Sustainable micro-milling of AISI H13 steel: Assessing copaiba oil as an eco-friendly lubricant in MQL-based micro-channel fabrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2026;240(10):3545-3561. doi:10.1177/09544062261416732
BibTeX
@article{Botelho2026,
author = {Botelho, Tamires Isabela Mesquita and Davis, Rahul and Pereira, Robson Bruno Dutra and Silva, Marcio Bacci da and Singh, Abhishek},
title = {Sustainable micro-milling of AISI H13 steel: Assessing copaiba oil as an eco-friendly lubricant in MQL-based micro-channel fabrication},
journal = {Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science},
year = {2026},
volume = {240},
number = {10},
pages = {3545--3561},
doi = {10.1177/09544062261416732}
}
EUVIMED