EUVIMEDAvasta EUVIMED
Crossref

Magnetic Properties of Fe, Co and Ni Based Nanopowders Produced by Chemical-Metallurgy Method

Tien Hiep Nguyen, Y. V. Konyukhov, Nguyen Van Minh, D. Y. Karpenkov, V. V. Levina, G. Karunakaran, A. G. Buchirina

Eurasian Chemico-Technological Journal · 2021

DOI: 10.18321/ectj1028 ↗

At a glance

Journal article in Eurasian Chemico-Technological Journal, 2021. Written by Tien Hiep Nguyen and 6 co-authors. Cited 4 times so far (Crossref); 20 references.

AbstraktBibliograafilised andmedCiteRelated studies

Abstract (original language)

This research study describes the magnetic properties of Fe, Co and Ni metallic nanopowders (NPs) and their ternary nanocomposites (NCs), which can be used as fillers in radio-wave absorbing composite materials and coatings, as well as for magnetic protection of banknotes and security paper. The nanopowders were prepared by the chemical metallurgy method. The desired properties of Fe, Co and Ni NPs and NCs were achieved by co-precipitation, the addition of surfactants and changes in reduction temperature and time parameters. Magnetic measurements showed that all samples of pure metal NPs are semi-hard magnetic materials. The added surfactants have distinct effects on the dimensional and magnetic characteristics of Fe, Co and Ni NPs. Ni–Co–Fe NCs are also mainly semi-hard magnetic materials. Fine-tuning of their composition and chemical reduction temperatures allows controlling the values of Ms and Hc in large ranges from 49 to 197 A·m2/kg and from 4.7 to 60.6 kA/m, respectively.

Cite

APA

Nguyen, T. H., Konyukhov, Y. V., Minh, N. V., Karpenkov, D. Y., Levina, V. V., Karunakaran, G., & Buchirina, A. G. (2021). Magnetic Properties of Fe, Co and Ni Based Nanopowders Produced by Chemical-Metallurgy Method. Eurasian Chemico-Technological Journal. https://doi.org/10.18321/ectj1028

Vancouver

Nguyen TH, Konyukhov YV, Minh NV, Karpenkov DY, Levina VV, Karunakaran G, et al. Magnetic Properties of Fe, Co and Ni Based Nanopowders Produced by Chemical-Metallurgy Method. Eurasian Chemico-Technological Journal. 2021. doi:10.18321/ectj1028

BibTeX
@article{Nguyen2021,
  author = {Nguyen, Tien Hiep and Konyukhov, Y. V. and Minh, Nguyen Van and Karpenkov, D. Y. and Levina, V. V. and Karunakaran, G. and Buchirina, A. G.},
  title = {Magnetic Properties of Fe, Co and Ni Based Nanopowders Produced by Chemical-Metallurgy Method},
  journal = {Eurasian Chemico-Technological Journal},
  year = {2021},
  doi = {10.18321/ectj1028}
}
Start for free →