EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Properties of Ni-B/B Composite Coatings Produced by Chemical Reduction

Anna Gajewska-Midziałek, Grzegorz Cieślak, Marta Gostomska, Tinatin Ciciszwili, Katarzyna Skroban, Adrian Dąbrowski, Edyta Pęśko, Edyta Wojda, Michał Głowacki, Anna Kapuścińska, Maria Trzaska

Coatings · 01.09.2023 · 13 (9) · 1535

DOI: 10.3390/coatings13091535 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Coatings, online erschienen am 01.09.2023. Verfasst von Anna Gajewska-Midziałek und 10 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Norway Grants 2014–2021 via the National Centre for Research and Development (Poland).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The paper presents the results of research on composite Ni-B coatings with embedded particles of boron produced by a chemical reduction method and their influence on the mechanical, tribological, and corrosion properties of produced materials. Boron was used in two forms: an alloy component and nanoparticles incorporated into the Ni-B matrix. The coatings were deposited from a bath at different concentrations of dispersion phase. The paper also presents the characteristics of the used boron particles. Results of morphology and surface topography (SEM) as well as the structure (XRD) of the produced coatings are presented. The mechanical properties of the produced coatings, like Knoop hardness, Martens hardness, and indentation hardness, as well as the modulus of elasticity, were determined. The tribological tests were carried out using the ball-on-disc method. Electrochemical corrosion tests were conducted by the potentiodynamic method. The adhesion of the coatings to the substrate was evaluated by the scratch test method. Consequently, this investigation yielded a novel material in the form of Ni-B/B composite coatings, exhibiting significantly improved mechanical and tribological properties compared to Ni-B coatings without embedded particles of the dispersion phase.

Förderung

  • Norway Grants 2014–2021 via the National Centre for Research and Development (Poland)

Zitieren

APA

Gajewska-Midziałek, A., Cieślak, G., Gostomska, M., Ciciszwili, T., Skroban, K., Dąbrowski, A., Pęśko, E., Wojda, E., Głowacki, M., Kapuścińska, A., & Trzaska, M. (2023). Properties of Ni-B/B Composite Coatings Produced by Chemical Reduction. Coatings, 13(9), 1535. https://doi.org/10.3390/coatings13091535

Vancouver

Gajewska-Midziałek A, Cieślak G, Gostomska M, Ciciszwili T, Skroban K, Dąbrowski A, et al. Properties of Ni-B/B Composite Coatings Produced by Chemical Reduction. Coatings. 2023;13(9):1535. doi:10.3390/coatings13091535

BibTeX
@article{GajewskaMidziaek2023,
  author = {Gajewska-Midziałek, Anna and Cieślak, Grzegorz and Gostomska, Marta and Ciciszwili, Tinatin and Skroban, Katarzyna and Dąbrowski, Adrian and Pęśko, Edyta and Wojda, Edyta and Głowacki, Michał and Kapuścińska, Anna and Trzaska, Maria},
  title = {Properties of Ni-B/B Composite Coatings Produced by Chemical Reduction},
  journal = {Coatings},
  year = {2023},
  volume = {13},
  number = {9},
  pages = {1535},
  doi = {10.3390/coatings13091535}
}
Kostenlos starten →