EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Comparison of the potential for bioprinting of different 3D printing technologies

Jesús M Rodríguez-Rego, Laura Mendoza-Cerezo, Antonio Macías-García, Alfonso C Marcos-Romero, Juan P Carrasco-Amador

International Journal of Bioprinting · 03.02.2023 · 9 (3) · 680

DOI: 10.18063/ijb.680 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Bioprinting, online erschienen am 03.02.2023. Verfasst von Jesús M Rodríguez-Rego und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Graphic Expression, School of Industrial Engineering, University of Extremadura, Badajoz 06006, Spain. Die Arbeit wurde bisher 11-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing technologies offer a multitude of medical applications due to the advances in the development of the materials used to reproduce customized model products. The main problem with these technologies is obtaining the correct cell viability values, and it is where three-dimensional (3D) bioprinting emerges as a very interesting tool that should be studied extensively, as it has significant disadvantages with respect to printability. In this work, the comparison of 3D bioprinting technology in hydrogels and thermoplastics for the development of biomimetic parts is proposed. To this end, the study of the printability of different materials widely used in the literature is proposed, to subsequently test and analyze the parameters that indicate whether these materials could be used to obtain a biomimetic structure with structural guarantees. In order to analyze the materials studied, different tools have been designed to facilitate the quantitative characterization of their printability using 3D printing. For this purpose, different structures have been developed and a characterization methodology has been followed to quantify the printability value of each material in each test to subsequently discard the materials that do not obtain a minimum value in the result. After the study, it was found that only gelatin methacryloyl (GelMA) 5% could generate biomimetic structures faithful to the designed 3D model. Furthermore, by comparing the printing results of the different materials used in 3D bioprinting and consequently establishing the approach of different strategies, it is shown that hydrogels need to be further developed to match the results achieved by thermoplastic materials used for bioprinting.

Schlagwörter

Stichwörter der Autor:innen

3D printingBioprintingHydrogelMatrigelPCLPrintability

Autor:innen und Institutionen

  • Department of Graphic Expression, School of Industrial Engineering, University of Extremadura, Badajoz 06006, Spain.
  • Department of Mechanical, Energy and Materials Engineering, School of Industrial Engineering, University of Extremadura, Badajoz 06006, Spain.

Zitieren

APA

Rodríguez-Rego, J. M., Mendoza-Cerezo, L., Macías-García, A., Marcos-Romero, A. C., & Carrasco-Amador, J. P. (2023). Comparison of the potential for bioprinting of different 3D printing technologies. International Journal of Bioprinting, 9(3), 680. https://doi.org/10.18063/ijb.680

Vancouver

Rodríguez-Rego JM, Mendoza-Cerezo L, Macías-García A, Marcos-Romero AC, Carrasco-Amador JP. Comparison of the potential for bioprinting of different 3D printing technologies. International Journal of Bioprinting. 2023;9(3):680. doi:10.18063/ijb.680

BibTeX
@article{RodrguezRego2023,
  author = {Rodríguez-Rego, Jesús M and Mendoza-Cerezo, Laura and Macías-García, Antonio and Marcos-Romero, Alfonso C and Carrasco-Amador, Juan P},
  title = {Comparison of the potential for bioprinting of different 3D printing technologies},
  journal = {International Journal of Bioprinting},
  year = {2023},
  volume = {9},
  number = {3},
  pages = {680},
  doi = {10.18063/ijb.680}
}
Kostenlos starten →