3D Printing for Tissue Engineering: Printing Techniques, Biomaterials, Challenges, and the Emerging Role of 4D Bioprinting
Bioengineering · 30.08.2025 · 12 (9) · 936
DOI: 10.3390/bioengineering12090936 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Bioengineering, online erschienen am 30.08.2025. Verfasst von Victor M Arias-Peregrino und 6 weiteren Autor:innen. Beteiligte Einrichtung: Tecnológico Nacional de México/IT de Villahermosa, Carretera Villahermosa-Frontera Km 3.5, Ciudad Industrial, Villahermosa 86010, Tabasco, Mexico. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 211 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Organ failure constitutes a significant global concern requiring urgent attention. While organ transplantation offers prospective treatment, it remains suboptimal. The scarcity of donor organs and the need for lifelong immunosuppressive treatments highlight the necessity for innovative approaches in regenerative medicine. In response, tissue engineering has emerged as a promising alternative, particularly through advancements in three-dimensional (3D) and four-dimensional (4D) printing technologies. These approaches enable the fabrication of complex, patient-specific constructs for regenerating tissues such as skin, bone, cartilage, and vascularized organs. This review systematically examines 3D printing techniques, commonly used biomaterials (e.g., hydrogels, bio-inks, and polymers), and their applications in dermal, cardiovascular, bone, and neural regeneration. In addition to discussing 3D technology, an introduction to 4D bioprinting is provided, enabling advanced biomedical applications and establishing itself as an innovative tool that enhances the classic approach to 3D bioprinting in the context of regenerative medicine. Finally, key challenges and ethical considerations are discussed to provide a comprehensive perspective on the current state and future of printed scaffolds in regenerative medicine.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Tecnológico Nacional de México/IT de Villahermosa, Carretera Villahermosa-Frontera Km 3.5, Ciudad Industrial, Villahermosa 86010, Tabasco, Mexico.
- Facultad de Ciencias Físico Matemáticas, Benemérita Universidad Autónoma de Puebla, Puebla 72570, Puebla, Mexico.
- Hospital General de Zona #86, Instituto Mexicano del Seguro Social, Uruapan 60137, Michoacán, Mexico.
- Tecnológico Nacional de México/IT del Valle de Etla, Santiago Suchilquitongo, Oaxaca 68230, Oaxaca, Mexico.
ORCID-Profile: Victor M Arias-Peregrino, Aldo Y Tenorio-Barajas, Claudia O Mendoza-Barrera, Sandra P Torres-Arellanes, Ramón Román-Doval
Zitieren
APA
Arias-Peregrino, V. M., Tenorio-Barajas, A. Y., Mendoza-Barrera, C. O., Román-Doval, J., Lavariega-Sumano, E. F., Torres-Arellanes, S. P., & Román-Doval, R. (2025). 3D Printing for Tissue Engineering: Printing Techniques, Biomaterials, Challenges, and the Emerging Role of 4D Bioprinting. Bioengineering, 12(9), 936. https://doi.org/10.3390/bioengineering12090936
Vancouver
Arias-Peregrino VM, Tenorio-Barajas AY, Mendoza-Barrera CO, Román-Doval J, Lavariega-Sumano EF, Torres-Arellanes SP, et al. 3D Printing for Tissue Engineering: Printing Techniques, Biomaterials, Challenges, and the Emerging Role of 4D Bioprinting. Bioengineering. 2025;12(9):936. doi:10.3390/bioengineering12090936
BibTeX
@article{AriasPeregrino2025,
author = {Arias-Peregrino, Victor M and Tenorio-Barajas, Aldo Y and Mendoza-Barrera, Claudia O and Román-Doval, Jesús and Lavariega-Sumano, Esteban F and Torres-Arellanes, Sandra P and Román-Doval, Ramón},
title = {3D Printing for Tissue Engineering: Printing Techniques, Biomaterials, Challenges, and the Emerging Role of 4D Bioprinting},
journal = {Bioengineering},
year = {2025},
volume = {12},
number = {9},
pages = {936},
doi = {10.3390/bioengineering12090936}
}
EUVIMED