Transforming waste cooking oil into a mechanically enhanced photocurable resin for 3D printing
Green Materials · 09.11.2026 · 14 (5) · 534-544
DOI: 10.1680/jgrma.25.00120 ↗Kurz gefasst
Fachartikel in der Zeitschrift Green Materials, online erschienen am 14.10.2025. Verfasst von Chuanyang Tang und 7 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Waste cooking oil (WCO), a substantial urban waste stream, holds untapped potential for synthesizing high-value materials. This study introduces a sustainable approach to convert WCO into a mechanically enhanced photocurable resin for three-dimensional (3D) printing through a sequential epoxidation-hydrolysis-blending process. Initially, WCO is transformed into WCO-based hydroxy fatty acids (WHFA), featuring a linear chain with multiple hydrogen-bonding sites, via epoxidation and hydrolysis. WHFA is then blended with triethylene glycol dimethacrylate (TEGDMA) to create photocurable resins. The resin demonstrates outstanding dimensional accuracy during light-curing 3D printing (penetration depth = 0.168 mm, dimensional deviations < 0.2%). WHFA serves as a dual-functional modifier in the WHFA/TEGDMA system, plasticizing the network while forming a dynamic hydrogen-bond network that acts as a physical crosslinker. This unique mechanism results in unprecedented mechanical properties among WCO-derived resins. In the optimized formulation (TEGDMA:WHFA = 15:1), the WHFA/TEGDMA resin exhibits a high tensile strength of 35.48 MPa (4.2 times higher than pure TEGDMA) and improved impact toughness (5.92 kJ/m2, 3 times that of pristine TEGDMA). This work offers a scalable, high-value pathway for WCO upcycling and highlights the crucial role of molecularly tailored WCO derivatives as functional additives for advanced 3D printable materials.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Tang, C., Shen, F., Yang, Y., Qin, G., Li, M., Jiang, H., Wu, M., & Chen, S. (2026). Transforming waste cooking oil into a mechanically enhanced photocurable resin for 3D printing. Green Materials, 14(5), 534-544. https://doi.org/10.1680/jgrma.25.00120
Vancouver
Tang C, Shen F, Yang Y, Qin G, Li M, Jiang H, et al. Transforming waste cooking oil into a mechanically enhanced photocurable resin for 3D printing. Green Materials. 2026;14(5):534-544. doi:10.1680/jgrma.25.00120
BibTeX
@article{Tang2026,
author = {Tang, Chuanyang and Shen, Fangping and Yang, Yang and Qin, Guangzhi and Li, Minghui and Jiang, Haitian and Wu, Mengyao and Chen, Shuoping},
title = {Transforming waste cooking oil into a mechanically enhanced photocurable resin for 3D printing},
journal = {Green Materials},
year = {2026},
volume = {14},
number = {5},
pages = {534--544},
doi = {10.1680/jgrma.25.00120}
}
EUVIMED