EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

3D Printing of Mechanically Robust Elastomers: Molecular Design and Fabrication with Urea-Containing Photocurable Monomers

Guohong Shi, Jiexiang Tong, Ren Liu iD

ACS Omega · 28.07.2026 · 11 (29) · 44275-44283

DOI: 10.1021/acsomega.6c04488 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 14.07.2026. Verfasst von Guohong Shi und 2 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Synthetic and Biological Colloids, Ministry of Education, School of Chemical and Material Engineering, Jiangnan University Wuxi, Ji…. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Jiangsu Provincial Department of Education, National Natural Science Foundation of China, Jiangsu Funding Program for Excellent Postdoctoral Talent.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The mechanical properties of UV-cured elastomers for digital light processing (DLP) 3D printing are essential for their practical applications. However, it remains challenging for printed elastomers to achieve both a high mechanical strength and excellent ductility. In this work, a series of novel photocurable monomers containing urea groups were synthesized via a simple one-step method and then used to fabricate mechanically robust elastomers through DLP 3D printing. The UV-cured elastomer systems showed high photopolymerization activity, which was compatible with the DLP 3D printing process. The as-prepared elastomers exhibited a high elongation at break (326%) while maintaining a high mechanical strength (20.7 MPa). The robust mechanical performances are attributed to the presence of urea groups in the molecular structure of photocurable monomers, which could act as physical cross-linking points to effectively dissipate the mechanical energy. In addition, the honeycomblike elastomers printed by DLP printing demonstrated excellent energy absorption capacity and could support a heavy weight (480 times their own weight) without any collapse. This study provides a simple and effective strategy for preparing mechanically robust elastomers for DLP-3D printing.

Autor:innen und Institutionen

  • Key Laboratory of Synthetic and Biological Colloids, Ministry of Education, School of Chemical and Material Engineering, Jiangnan University Wuxi, Jiangsu 214122, China.
  • International Research Center for Photoresponsive Molecules and Materials, Jiangnan University, Wuxi, Jiangsu 214122, China.

ORCID-Profile: Ren Liu

Förderung

  • Jiangsu Provincial Department of Education
  • National Natural Science Foundation of China
  • Jiangsu Funding Program for Excellent Postdoctoral Talent

Zitieren

APA

Shi, G., Tong, J., & Liu, R. (2026). 3D Printing of Mechanically Robust Elastomers: Molecular Design and Fabrication with Urea-Containing Photocurable Monomers. ACS Omega, 11(29), 44275-44283. https://doi.org/10.1021/acsomega.6c04488

Vancouver

Shi G, Tong J, Liu R. 3D Printing of Mechanically Robust Elastomers: Molecular Design and Fabrication with Urea-Containing Photocurable Monomers. ACS Omega. 2026;11(29):44275-44283. doi:10.1021/acsomega.6c04488

BibTeX
@article{Shi2026,
  author = {Shi, Guohong and Tong, Jiexiang and Liu, Ren},
  title = {3D Printing of Mechanically Robust Elastomers: Molecular Design and Fabrication with Urea-Containing Photocurable Monomers},
  journal = {ACS Omega},
  year = {2026},
  volume = {11},
  number = {29},
  pages = {44275--44283},
  doi = {10.1021/acsomega.6c04488}
}
Kostenlos starten →