EUVIMEDScopri EUVIMED
Crossref

DEPENDENCE OF AERODYNAMIC DRAG AND HEAT FLUX ON THE BLUNTNESS DEGREE OF HYPERSONIC MISSILE FAIRINGS

V. S. Filipkovskyi

System design and analysis of aerospace technique characteristics · 2026-05-14 · 38 (1) · 66-86

DOI: 10.15421/472606 ↗

At a glance

Journal article in System design and analysis of aerospace technique characteristics, published online on 2026-05-14. Written by V. S. Filipkovskyi.

AbstractDati bibliograficiCiteRelated studies

Abstract (original language)

The paper investigates the influence of the nose shape of a hypersonic missile on aerodynamic drag and thermal loads in order to improve flight efficiency and reduce energy losses. It is shown that the maximum heat fluxes occur in the stagnation point region and are determined by the bluntness degree of the fairing, whereas the aerodynamic drag depends on shock-wave parameters and flow structure. A combination of numerical simulation and engineering methods is proposed for optimizing the characteristics of hypersonic vehicles. A comprehensive analysis of the geometric parameters of blunted conical and conical-spherical fairings was carried out for flight velocities ranging from Mach 5 to Mach 7. A mathematical model relating aerodynamic heating and aerodynamic drag parameters through the nose bluntness radius and cone semi-vertex angle was developed. The use of Pareto charts makes it possible to visually determine the limits of effective thermal protection depending on the aerodynamic efficiency requirements of the fairing. It was established that for conical fairings at flight velocities exceeding Mach 5 there is a critical bluntness value beyond which a further increase in the nose radius does not provide a significant temperature reduction but leads to an unjustified increase in drag. It is shown that the optimal ratio between heat flux density and drag coefficient is achieved at a fairing fineness ratio of 4.6. For such conditions, the ratio of the fairingnose bluntness radius to the base diameter should be selected within the range of 0.08–0.12. The obtained results can be applied as an express-analysis tool at the preliminary design stage of more complex ogive fairings. The proposed dependencies improve the efficiency of engineering calculations and enable the determination of structural parameters balanced according to aerodynamic and thermal criteria.

Cite

APA

Filipkovskyi, V. S. (2026). DEPENDENCE OF AERODYNAMIC DRAG AND HEAT FLUX ON THE BLUNTNESS DEGREE OF HYPERSONIC MISSILE FAIRINGS. System design and analysis of aerospace technique characteristics, 38(1), 66-86. https://doi.org/10.15421/472606

Vancouver

Filipkovskyi VS. DEPENDENCE OF AERODYNAMIC DRAG AND HEAT FLUX ON THE BLUNTNESS DEGREE OF HYPERSONIC MISSILE FAIRINGS. System design and analysis of aerospace technique characteristics. 2026;38(1):66-86. doi:10.15421/472606

BibTeX
@article{Filipkovskyi2026,
  author = {Filipkovskyi, V. S.},
  title = {DEPENDENCE OF AERODYNAMIC DRAG AND HEAT FLUX ON THE BLUNTNESS DEGREE OF HYPERSONIC MISSILE FAIRINGS},
  journal = {System design and analysis of aerospace technique characteristics},
  year = {2026},
  volume = {38},
  number = {1},
  pages = {66--86},
  doi = {10.15421/472606}
}
Start for free →