Effects of Surface Catalycity on Thermocouples Used for Hypersonic Heat Flux Measurement
Journal of Thermophysics and Heat Transfer · 20.08.2026 · 1-12
DOI: 10.2514/1.t7450 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Thermophysics and Heat Transfer, online erschienen am 20.08.2026. Verfasst von Sara J. Swenson und 4 weiteren Autor:innen. Die Arbeit nennt 64 Literaturangaben. Gefördert von: Air Force Office of Scientific Research.
Abstract (Originalsprache)
Metallic thermocouples are widely used for heat flux measurements in hypersonic ground and flight tests. If their materials differ from the surrounding surface, they introduce local discontinuities in surface properties. This work examines how such variations in material catalycity impact surface heat flux for hypersonic flows. A partially catalytic boundary condition is implemented in a hypersonic CFD solver, enabling species- and material-specific recombination at the wall. Analysis is performed for Mach 7 hypersonic airflow over a cylinder for which heat flux has been measured using thermocouples. Parametric studies demonstrate that for this flow condition, heat flux is highly sensitive to the oxygen recombination coefficient and minimally affected by nitrogen recombination. To directly emulate the experiments, simulations incorporate discrete segments of the thermocouple material (constantan) on the stainless steel surface of the cylinder. These analyses reveal localized heat flux overshoots and undershoots at material interfaces that arise from species transport and surface reaction coupling. Such effects are consistent with the experimental measurements and indicate that thermocouple materials can significantly perturb the local heat flux where measurements are taken. The results highlight the importance of accurately capturing wall material heterogeneity in both modeling and experimental interpretation of high-enthalpy flows.
Förderung
- Air Force Office of Scientific Research
Zitieren
APA
Swenson, S. J., Leszcz, C., Boyd, I. D., Chaudhry, R. S., & Aiken, T. T. (2026). Effects of Surface Catalycity on Thermocouples Used for Hypersonic Heat Flux Measurement. Journal of Thermophysics and Heat Transfer, 1-12. https://doi.org/10.2514/1.t7450
Vancouver
Swenson SJ, Leszcz C, Boyd ID, Chaudhry RS, Aiken TT. Effects of Surface Catalycity on Thermocouples Used for Hypersonic Heat Flux Measurement. Journal of Thermophysics and Heat Transfer. 2026:1-12. doi:10.2514/1.t7450
BibTeX
@article{Swenson2026,
author = {Swenson, Sara J. and Leszcz, Cate and Boyd, Iain D. and Chaudhry, Ross S. and Aiken, Timothy T.},
title = {Effects of Surface Catalycity on Thermocouples Used for Hypersonic Heat Flux Measurement},
journal = {Journal of Thermophysics and Heat Transfer},
year = {2026},
pages = {1--12},
doi = {10.2514/1.t7450}
}
EUVIMED