EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Nanosecond multi-passes laser surface texturing on AISI 301LN TRIP steel

Mohammad Rezayat, Mahmoud Moradi, Antonio Mateo

The International Journal of Advanced Manufacturing Technology · 2024-06 · 132 (9-10) · 4753-4764

DOI: 10.1007/s00170-024-13638-0 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 25.04.2024. Verfasst von Mohammad Rezayat und 2 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser surface texturing is a promising technique for improving the surface properties of metals. In this study, a nanosecond pulsed laser was used to perform surface texturing on a metastable austenitic stainless steel AISI 301LN. The effects of the number of laser passes (from 1 to 1000 passes) on the surface morphology, microstructure, and mechanical properties were investigated. The results show that the depth of laser tracks increases with the number of passes due to thermal accumulation. Increasing the number of laser passes produces a rougher surface, but beyond a certain value, a smoother texture is observed. The amount of α’-martensite phase induced by the laser increases with the number of passes, producing augments in hardness. However, again, this trend changes after a certain number of laser passes, and hardening saturates and even decreases. Therefore, selecting the appropriate laser processing parameters and number of passes is essential to control the dimensions of laser tracks and thus the desired surface texture and also to achieve the level of hardening.

Zitieren

APA

Rezayat, M., Moradi, M., & Mateo, A. (2024). Nanosecond multi-passes laser surface texturing on AISI 301LN TRIP steel. The International Journal of Advanced Manufacturing Technology, 132(9-10), 4753-4764. https://doi.org/10.1007/s00170-024-13638-0

Vancouver

Rezayat M, Moradi M, Mateo A. Nanosecond multi-passes laser surface texturing on AISI 301LN TRIP steel. The International Journal of Advanced Manufacturing Technology. 2024;132(9-10):4753-4764. doi:10.1007/s00170-024-13638-0

BibTeX
@article{Rezayat2024,
  author = {Rezayat, Mohammad and Moradi, Mahmoud and Mateo, Antonio},
  title = {Nanosecond multi-passes laser surface texturing on AISI 301LN TRIP steel},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2024},
  volume = {132},
  number = {9-10},
  pages = {4753--4764},
  doi = {10.1007/s00170-024-13638-0}
}
Kostenlos starten →