Parameter Optimization of the Injection Molding Process Using the Taguchi Method
Management and Production Engineering Review · 28.12.2025
DOI: 10.24425/mper.2025.157208 ↗Kurz gefasst
Fachartikel in der Zeitschrift Management and Production Engineering Review, online erschienen am 28.12.2025. Verfasst von Nguyen QUANG SANG und 1 weiteren Autor:innen.
Abstract (Originalsprache)
This study addresses the high defect rate (up to 99%) and the heavy dependence on operator experience in the Direct Memory Access (DMA) injection molding process. To overcome these limitations, the study applies the Taguchi method using L18 orthogonal arrays to systematically optimize six key process parameters: nozzle size, mold temperature, ejection pressure, binder chemical concentration, mold material weight, and molding time. Signal-to-noise (S/N) analysis and ANOVA were used to identify the most influential factors and determine the optimal settings. The results show a significant reduction in defect rates: delamination defects decreased from 20% to 4%, flat wire defects from 4% to 0.5%, and corrugated plastic defects from 0.6% to 0.1%. Notably, the integration of computer vision inspection and process optimization improved product quality and reduced production time. The novelty of this study lies in the systematic application of the Taguchi method to high-precision semiconductor processes and the combination with advanced testing technologies, opening up a new direction in process optimization for the industry.
Zitieren
APA
SANG, N. Q., & DUC, M. L. (2025). Parameter Optimization of the Injection Molding Process Using the Taguchi Method. Management and Production Engineering Review. https://doi.org/10.24425/mper.2025.157208
Vancouver
SANG NQ, DUC ML. Parameter Optimization of the Injection Molding Process Using the Taguchi Method. Management and Production Engineering Review. 2025. doi:10.24425/mper.2025.157208
BibTeX
@article{SANG2025,
author = {SANG, Nguyen QUANG and DUC, Minh LY},
title = {Parameter Optimization of the Injection Molding Process Using the Taguchi Method},
journal = {Management and Production Engineering Review},
year = {2025},
doi = {10.24425/mper.2025.157208}
}
EUVIMED