EUVIMEDEUVIMED entdecken
Crossref

The effects of heating rate and sintering time on the biaxial flexural strength of monolithic zirconia ceramics

Perihan Oyar iD, Rukiye Durkan iD

Biomedical Engineering / Biomedizinische Technik · 28.08.2023 · 68 (4) · 437-443

DOI: 10.1515/bmt-2022-0338 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biomedical Engineering / Biomedizinische Technik, online erschienen am 20.03.2023. Verfasst von Perihan Oyar und 1 weiteren Autor:innen. Beteiligte Einrichtung: Dental Prosthetics Technology, Vocational School of Health Services, Hacettepe University, Ankara, Türkiye. Hauptthemen laut MEDLINE: Flexural Strength. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 40 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The strength of zirconia ceramic materials used in restorations is dependent upon sintering. Varying sintering protocols may affect the biaxial flexural strength of zirconia materials. This in vitro study was conducted to investigate the effects of sintering parameters on the biaxial flexural strength of monolithic zirconia. Two different monoblock zirconia ceramics were used. Following coloration, samples of both types of ceramics were divided into groups according to whether or not biaxial flexural strength testing was performed directly after sintering or following thermocycling. Biaxial flexural strength data was analysed with a Shapiro Wilk normality test, followed by 1-way ANOVA, Tukey post hoc tests for inter-group comparisons, and paired samples t-tests for intra-group comparisons. A significant difference was found between the biaxial flexural strengths of Zircon X and Upcera ceramics before thermocycling (p

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Flexural StrengthMaterials TestingSurface PropertiesZirconiumCeramicsDental MaterialsSilicatesHot Temperature

Stichwörter der Autor:innen

dental ceramicflexural strengthmonolithic zirconiasintering

Substanzen

ZirconiumDental Materialszirconium oxidezirconSilicates

Autor:innen und Institutionen

  • Dental Prosthetics Technology, Vocational School of Health Services, Hacettepe University, Ankara, Türkiye.
  • Department of Prosthodontics, Faculty of Dentistry, Istanbul Okan University, Istanbul, Türkiye.

ORCID-Profile: Perihan Oyar, Rukiye Durkan

Zitieren

APA

Oyar, P., & Durkan, R. (2023). The effects of heating rate and sintering time on the biaxial flexural strength of monolithic zirconia ceramics. Biomedical Engineering / Biomedizinische Technik, 68(4), 437-443. https://doi.org/10.1515/bmt-2022-0338

Vancouver

Oyar P, Durkan R. The effects of heating rate and sintering time on the biaxial flexural strength of monolithic zirconia ceramics. Biomedical Engineering / Biomedizinische Technik. 2023;68(4):437-443. doi:10.1515/bmt-2022-0338

BibTeX
@article{Oyar2023,
  author = {Oyar, Perihan and Durkan, Rukiye},
  title = {The effects of heating rate and sintering time on the biaxial flexural strength of monolithic zirconia ceramics},
  journal = {Biomedical Engineering / Biomedizinische Technik},
  year = {2023},
  volume = {68},
  number = {4},
  pages = {437--443},
  doi = {10.1515/bmt-2022-0338}
}
Kostenlos starten →