Investigation of the Effect of HVOF Spray Parameters on the Quality Properties of Cr3C2-20(Ni20Cr) Coating on Ti6Al4V Substrate
Defence Science Journal · 27.10.2026 · 76 (6) · 923-931
DOI: 10.14429/dsj.21852 ↗Kurz gefasst
Fachartikel in der Zeitschrift Defence Science Journal, online erschienen am 27.10.2026. Verfasst von Hariharan Venkataraman und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 2.5).
Abstract (Originalsprache)
Systematic optimization of high-velocity oxy-fuel (HVOF) spray parameters, such as spray distance, powder feed rate, and fuel gas flow rates, requires numerous experiments to determine the conditions that maximize coating quality. In this study, full factorial design (FFD), a more robust and efficient methodology than the traditional one-factor-at-a-time (OFAT) methodology, was employed to investigate the influence of HVOF spray parameters of Cr₃C₂-20(Ni20Cr) coating deposited onto a Ti6Al4V substrate. The design of experiments (DOE) approach using an FFD with 24 experimental runs was employed to evaluate all input factors at two levels. The coating response properties were measured for each experimental run. Analysis of variance (ANOVA) was used to quantify the contribution of each spray parameter to the output responses. The effect of the interaction between spray parameters, such as spray distance, powder feed rate, and fuel gas flow rates, on the coating properties for this substrate-coating combination has scarcely been reported. Hence, a Pareto chart was also utilized to analyze the interaction effects of the spray parameters on coating properties. Finally, acceptable quality attributes such as hardness, porosity, and oxides were established with the spraying parameters, namely, standoff distance, powder feed rate, hydrogen flow rate, and oxygen flow rate, respectively, at the values of 150 mm, 25 g/min, 475 NLPM, and 205 NLPM.
Zitieren
APA
Venkataraman, H., Bagade, V. U., & Biju, V. (2026). Investigation of the Effect of HVOF Spray Parameters on the Quality Properties of Cr3C2-20(Ni20Cr) Coating on Ti6Al4V Substrate. Defence Science Journal, 76(6), 923-931. https://doi.org/10.14429/dsj.21852
Vancouver
Venkataraman H, Bagade VU, Biju V. Investigation of the Effect of HVOF Spray Parameters on the Quality Properties of Cr3C2-20(Ni20Cr) Coating on Ti6Al4V Substrate. Defence Science Journal. 2026;76(6):923-931. doi:10.14429/dsj.21852
BibTeX
@article{Venkataraman2026,
author = {Venkataraman, Hariharan and Bagade, Vishal Uttamrao and Biju, V.M.},
title = {Investigation of the Effect of HVOF Spray Parameters on the Quality Properties of Cr3C2-20(Ni20Cr) Coating on Ti6Al4V Substrate},
journal = {Defence Science Journal},
year = {2026},
volume = {76},
number = {6},
pages = {923--931},
doi = {10.14429/dsj.21852}
}
EUVIMED