EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of laser processing parameters and scanning angle on damage morphology and residual tensile properties of CFRP laminates with a continuum damage mechanics model

Wei Liang iD, Mingwei Ren, Yunbo Chen, Lingli Zuo, Peng Pan

PLOS One · 06.11.2026 · 21 (11) · e0361461

DOI: 10.1371/journal.pone.0361461 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS One, online erschienen am 06.11.2026. Verfasst von Wei Liang und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, University of Science and Technology Beijing, Beijing, China. Hauptthemen laut MEDLINE: Tensile Strength, Lasers, Carbon Fiber, Carbon. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser processing of carbon fiber-reinforced polymer (CFRP) composites offers significant advantages in precision and efficiency, yet the thermal damage it induces remains a critical concern for structural integrity. This study investigates the effects of laser drilling and cutting on the damage morphology and residual tensile properties of T300-3K/epoxy CFRP laminates, with systematic variation of laser power, irradiation duration, scanning angle, and scanning distance across 21 processing conditions. White-light interferometric microscopy characterized three-dimensional ablation topography, and uniaxial tensile testing quantified mechanical degradation. For drilled specimens, increasing power from 250 W to 1000 W enlarged the ablation crater diameter by approximately 200% (1007–3021 μm), while extending irradiation duration from 0.5 s to 1.0 s produced a further 37% increase. For cut specimens, perpendicular scanning induced a broader heat-affected zone and more severe interfacial disruption than fiber-parallel scanning due to anisotropic thermal conductivity, with the maximum surface height difference reaching 4259 μm at 500 W and 90°. Residual tensile strength decreased monotonically with increasing energy input: drilled specimen strength declined from 735 MPa to 293 MPa (a reduction of over 60% to the pristine strength of 954 MPa); cut specimen strength at 500 W decreased from 466 MPa at 0° to 233 MPa at 90° due to progressive fiber severance, with cut specimens consistently weaker than drilled counterparts owing to kerf-induced stress concentration. A CDM-based empirical model integrating all four parameters was developed; nonlinear regression yielded A = 0.0266187, m = 0.464431, n = 0.645373, α = 0.0745099, β = 0.22664, and R 2 = 0.9151, providing a validated quantitative tool for structural integrity assessment of laser-processed CFRP components.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Tensile StrengthLasersCarbon FiberCarbonMaterials Testing

Substanzen

Carbon FiberCarbon

Autor:innen und Institutionen

  • School of Mechanical Engineering, University of Science and Technology Beijing, Beijing, China.
  • China Academy of Machinery Science and Technology Group Co., Ltd, Beijing, China.
  • Beijing National Innovation Institute of Lightweight Ltd, Beijing, China.

ORCID-Profile: Wei Liang

Zitieren

APA

Liang, W., Ren, M., Chen, Y., Zuo, L., & Pan, P. (2026). Effects of laser processing parameters and scanning angle on damage morphology and residual tensile properties of CFRP laminates with a continuum damage mechanics model. PLOS One, 21(11), e0361461. https://doi.org/10.1371/journal.pone.0361461

Vancouver

Liang W, Ren M, Chen Y, Zuo L, Pan P. Effects of laser processing parameters and scanning angle on damage morphology and residual tensile properties of CFRP laminates with a continuum damage mechanics model. PLOS One. 2026;21(11):e0361461. doi:10.1371/journal.pone.0361461

BibTeX
@article{Liang2026,
  author = {Liang, Wei and Ren, Mingwei and Chen, Yunbo and Zuo, Lingli and Pan, Peng},
  title = {Effects of laser processing parameters and scanning angle on damage morphology and residual tensile properties of CFRP laminates with a continuum damage mechanics model},
  journal = {PLOS One},
  year = {2026},
  volume = {21},
  number = {11},
  pages = {e0361461},
  doi = {10.1371/journal.pone.0361461}
}
Kostenlos starten →