Synergistic enhancement of Al-Si7Mg alloy: Strengthening mechanical properties through combined electromagnetic agitation and AL-10%Ti refinement
PLOS One · 2026
DOI: 10.1371/journal.pone.0341127 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS One, 2026. Verfasst von G Shaikshavali und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, G. Pulla Reddy Engineering College, Kurnool, Andhra Pradesh, India. Hauptthemen laut MEDLINE: Alloys, Magnesium, Aluminum, Silicon. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Al-Si7Mg alloy is widely used in automotive and aerospace applications due to its favorable strength-to-weight ratio and corrosion resistance. However, further enhancement of its mechanical properties remains a key challenge. While grain refinement through chemical additives is common, the synergistic effect of combining a chemical grain refiner with external electromagnetic agitation during solidification has not been fully explored. This study investigates the simultaneous application of Al-10%Ti grain refiner and electromagnetic agitation, via a custom electromagnetic force (EMF) coil, on the microstructure and mechanical properties of Al-Si7Mg alloy. The EMF voltage was varied from 0 to 220 V. Microstructural analysis revealed that the combined treatment effectively transformed coarse, acicular silicon phases into a fine, closed-grain structure. This refinement is attributed to the electromagnetic agitation promoting uniform dispersion and increased potency of Al-10%Ti particles, which act as heterogeneous nucleation sites. The optimized microstructure led to significant improvements in mechanical properties: the sample treated with Al-10%Ti and 180 V EMF exhibited a maximum ultimate tensile strength of 173.3 N/mm², representing a 15% increase over the untreated baseline. Hardness improved by 21%, elongation increased by 60%, and wear resistance was notably enhanced, particularly at higher EMF levels (180–220 V). The results demonstrate that the combined approach offers a synergistic mechanism for microstructural refinement and property enhancement in Al-Si7Mg alloy, providing a promising route for advanced casting processes.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Department of Mechanical Engineering, G. Pulla Reddy Engineering College, Kurnool, Andhra Pradesh, India.
- Department of Mechanical Engineering, Galgotias University, Greater Noida, Uttar Pradesh, India.
- Institute for Environment and Sanitation Studies, College of Basic and Applied Sciences, University of Ghana, Legon - Accra, Ghana.
ORCID-Profile: Din Bandhu, Daniel Amoako Darko
Zitieren
APA
Shaikshavali, G., Bandhu, D., Tyagi, R., Goud, E. V., & Darko, D. A. (2026). Synergistic enhancement of Al-Si7Mg alloy: Strengthening mechanical properties through combined electromagnetic agitation and AL-10%Ti refinement. PLOS One. https://doi.org/10.1371/journal.pone.0341127
Vancouver
Shaikshavali G, Bandhu D, Tyagi R, Goud EV, Darko DA. Synergistic enhancement of Al-Si7Mg alloy: Strengthening mechanical properties through combined electromagnetic agitation and AL-10%Ti refinement. PLOS One. 2026. doi:10.1371/journal.pone.0341127
BibTeX
@article{Shaikshavali2026,
author = {Shaikshavali, G and Bandhu, Din and Tyagi, Rashi and Goud, E Venugopal and Darko, Daniel Amoako},
title = {Synergistic enhancement of Al-Si7Mg alloy: Strengthening mechanical properties through combined electromagnetic agitation and AL-10%Ti refinement},
journal = {PLOS One},
year = {2026},
doi = {10.1371/journal.pone.0341127}
}
EUVIMED