Springback characteristics and influencing laws of four-axis flexible roll bending forming for aluminum alloy
PLOS ONE · 27.08.2024 · 19 (8) · e0306604
DOI: 10.1371/journal.pone.0306604 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS ONE, online erschienen am 27.08.2024. Verfasst von Peng Chen und 1 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanic and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, China. Hauptthemen laut MEDLINE: Aluminum, Alloys. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Jiangsu Provinvial Key R&D Program Project.
Abstract (Originalsprache)
This study aims to solve the problem of springback control of aluminum alloy components in the rolling process, and the method of combining experiment and simulation is adopted. Firstly, a series of aluminum alloy samples are designed, and the four-axis flexible bending machine is used for precision roll bending. Secondly, the three-dimensional (3D) shape change data of the workpiece before and after roll bending is monitored and recorded in real-time by a high-precision 3D scanner. Meanwhile, aiming at different rolling process parameters of each group (including roll bend speed, feed rate, pre-deformation amount, mold curvature radius, and other factors), advanced finite element software is used to carry out detailed simulation and calculations. In addition, the coincidence is compared and analyzed between the actual experiment results and the simulation prediction. The stress-strain distribution and springback evolution of aluminum alloy during roll bending are described accurately. The experimental and simulation results show that the springback rate of aluminum alloy fluctuates in the range of 5% to 15% after four-axis flexible roll bending, and the specific springback value is influenced by various process parameters. For example, under the premise of keeping other conditions unchanged, when the roll bending speed is increased from 30mm/s to 60mm/s, the springback rate shows an upward trend of about 3%. By increasing the feed rate by 20%, an average decrease of about 7% in springback quantity is observed. It can be seen that the increase in roll bending speed can aggravate the springback phenomenon, and the appropriate increase in feed rate can play a certain role in restraining the springback. Further analysis shows that the choice of the mold curvature radius and pre-deformation amount also has a decisive influence on the springback characteristics. There is a nonlinear relationship between the two parameters and the amount of springback. Changing these two parameters in a specific range can effectively regulate the springback effect.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- College of Mechanic and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, China.
ORCID-Profile: Peng Chen
Förderung
- Jiangsu Provinvial Key R&D Program Project
Zitieren
APA
Chen, P., & Lu, S. (2024). Springback characteristics and influencing laws of four-axis flexible roll bending forming for aluminum alloy. PLOS ONE, 19(8), e0306604. https://doi.org/10.1371/journal.pone.0306604
Vancouver
Chen P, Lu S. Springback characteristics and influencing laws of four-axis flexible roll bending forming for aluminum alloy. PLOS ONE. 2024;19(8):e0306604. doi:10.1371/journal.pone.0306604
BibTeX
@article{Chen2024,
author = {Chen, Peng and Lu, Shihong},
title = {Springback characteristics and influencing laws of four-axis flexible roll bending forming for aluminum alloy},
journal = {PLOS ONE},
year = {2024},
volume = {19},
number = {8},
pages = {e0306604},
doi = {10.1371/journal.pone.0306604}
}
EUVIMED