Finite element modeling of stress distribution and safety factors in a Ti-27Nb alloy hip implant under real-world physiological loading scenarios
PLOS ONE · 06.08.2024 · 19 (8) · e0300270
DOI: 10.1371/journal.pone.0300270 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS ONE, online erschienen am 06.08.2024. Verfasst von Muhammad Amjad und 10 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, International Islamic University, Islamabad, Pakistan. Hauptthemen laut MEDLINE: Finite Element Analysis, Hip Prosthesis, Titanium, Alloys. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 94 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Total hip arthroplasty (THA) is one of the most successful orthopaedic interventions globally, with over 450,000 procedures annually in the U.S. alone. However, issues like aseptic loosening, dislocation, infection and stress shielding persist, necessitating complex, costly revision surgeries. This highlights the need for continued biomaterials innovation to enhance primary implant integrity and longevity. Implant materials play a pivotal role in determining long-term outcomes, with titanium alloys being the prominent choice. However, emerging evidence indicates scope for optimized materials. The nickel-free β titanium alloy Ti-27Nb shows promise with excellent biocompatibility and mechanical properties. Using finite element analysis (FEA), this study investigated the biomechanical performance and safety factors of a hip bone implant made of nickel-free titanium alloy (Ti-27Nb) under actual loading during routine day life activities for different body weights. The FEA modelled physiological loads during walking, jogging, stair ascent/descent, knee bend, standing up, sitting down and cycling for 75 kg and 100 kg body weights. Comparative analyses were conducted between untreated versus 816-hour simulated body fluid (SBF) treated implant conditions to determine in vivo degradation effects. The FEA predicted elevated von Mises stresses in the implant neck for all activities, especially stair climbing, due to its smaller cross-section. Stresses increased substantially with a higher 100 kg body weight compared to 75 kg, implying risks for heavier patients. Safety factors were reduced by up to 58% between body weights, although remaining above the desired minimum value of 1. Negligible variations were observed between untreated and SBF-treated responses, attributed to Ti-27Nb’s excellent biocorrosion resistance. This comprehensive FEA provided clinically relevant insights into the biomechanical behaviour and integrity of the Ti-27Nb hip implant under complex loading scenarios. The results can guide shape and material optimization to improve robustness against repetitive stresses over long-term use. Identifying damage accumulation and failure risks is crucial for hip implants encountering real-world variable conditions. The negligible SBF effects validate Ti-27Nb’s resistance to physiological degradation. Overall, the study significantly advances understanding of Ti-27Nb’s suitability for reliable, durable hip arthroplasties with low revision rates.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Department of Mechanical Engineering, International Islamic University, Islamabad, Pakistan.
- Department of Materials Science & Engineering, Institute of Space Technology, Islamabad, Pakistan.
- Mechanical Engineering Department, College of Engineering, University of Bahrain, Zallaq, Bahrain.
- Department of Mechanical Engineering, College of Engineering, Prince Mohammad Bin Fahd University (PMU), Al-Khobar, Saudi Arabia.
- Aerospace Engineering Department, King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia.
ORCID-Profile: Muhammad Imran Khan
Zitieren
APA
Amjad, M., Badshah, S., Ahmad, S., Badshah, M., Jan, S., Yasir, M., Akram, W., Alam Shah, I., Muhammad, R., Khan, M. I., & Yasmeen, T. (2024). Finite element modeling of stress distribution and safety factors in a Ti-27Nb alloy hip implant under real-world physiological loading scenarios. PLOS ONE, 19(8), e0300270. https://doi.org/10.1371/journal.pone.0300270
Vancouver
Amjad M, Badshah S, Ahmad S, Badshah M, Jan S, Yasir M, et al. Finite element modeling of stress distribution and safety factors in a Ti-27Nb alloy hip implant under real-world physiological loading scenarios. PLOS ONE. 2024;19(8):e0300270. doi:10.1371/journal.pone.0300270
BibTeX
@article{Amjad2024,
author = {Amjad, Muhammad and Badshah, Saeed and Ahmad, Sajjad and Badshah, Mujahid and Jan, Sakhi and Yasir, Muhammad and Akram, Waseem and Alam Shah, Imtiaz and Muhammad, Riaz and Khan, Muhammad Imran and Yasmeen, Tabassam},
title = {Finite element modeling of stress distribution and safety factors in a Ti-27Nb alloy hip implant under real-world physiological loading scenarios},
journal = {PLOS ONE},
year = {2024},
volume = {19},
number = {8},
pages = {e0300270},
doi = {10.1371/journal.pone.0300270}
}
EUVIMED