EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Seismic performance and bearing capacity calculation of cross shaped concrete columns with built-in T-shaped steel and steel tubes

Lidong Zhao, Yong Yu iD, Congrong Tang, Licai Zhong, Qirong Qiu

PLOS ONE · 2023

DOI: 10.1371/journal.pone.0290426 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS ONE, 2023. Verfasst von Lidong Zhao und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Computer and Artificial Intelligence, LanZhou Institute of Technology, Lanzhou, Gansu Province, China. Hauptthemen laut MEDLINE: Bone Plates, Data Compression. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangdong Basic and Applied Basic Research Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Incorporating T-shaped steel and square steel tubes into a cross shaped concrete column can significantly improve the seismic performance of the cross shaped column. However, the experimental samples are limited, so ABAQUS finite element (FE) analysis method was adopted in this paper to study the seismic performance of this cross shaped column, calculate and verify three specimens in the existing reference. Based on the reliable model, parameter analysis was carried out (25 specimens in total). The results show that the established model has a high degree of coincidence in the hysteretic curve, skeleton curve and failure mode, and the error of ultimate bearing capacity and ductility is within 10%. The configuration of T-shaped steel and square steel tubes inside the cross column can meet the ductility requirements specified in the standard under high axial compression ratio. The ultimate bearing capacity of the cross shaped column increases with the increase of the thickness of the square steel tube, but the ductility deteriorates. The increase in steel tube size increases the strength of the concrete in the core area, and the seismic performance of the cross shaped column was improved. Increasing the thickness of the T-shaped steel flange can better improve the seismic performance of the cross shaped column compared to increasing the thickness of the T-shaped steel web plate. Increasing the height of the specimen will significantly reduce its seismic performance. When the shear span ratio is not greater than 4.1, the ductility can meet the standard requirements. The error of the formula for calculating the compression-bending bearing capacity proposed based on existing calculation methods is less than 5%.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Bone PlatesData CompressionFinite Element AnalysisRadiopharmaceuticalsSteel

Substanzen

RadiopharmaceuticalsSteel

Autor:innen und Institutionen

  • College of Computer and Artificial Intelligence, LanZhou Institute of Technology, Lanzhou, Gansu Province, China.
  • School of Environment and Civil Engineering, Dongguan University of Technology, Dongguan, Guangdong Province, China.
  • Nanjing Sutong Road Bridge Engineering Co., Ltd., Nanjing, Jiangsu Province, China.
  • Lanzhou Resources & Environment Voc-Tech University, Lanzhou, Gansu Province, China.
  • Shanghai Construction Engineering Fifth Construction Group Co., Ltd., Shanghai, China.

ORCID-Profile: Yong Yu

Förderung

  • Guangdong Basic and Applied Basic Research Foundation

Zitieren

APA

Zhao, L., Yu, Y., Tang, C., Zhong, L., & Qiu, Q. (2023). Seismic performance and bearing capacity calculation of cross shaped concrete columns with built-in T-shaped steel and steel tubes. PLOS ONE. https://doi.org/10.1371/journal.pone.0290426

Vancouver

Zhao L, Yu Y, Tang C, Zhong L, Qiu Q. Seismic performance and bearing capacity calculation of cross shaped concrete columns with built-in T-shaped steel and steel tubes. PLOS ONE. 2023. doi:10.1371/journal.pone.0290426

BibTeX
@article{Zhao2023,
  author = {Zhao, Lidong and Yu, Yong and Tang, Congrong and Zhong, Licai and Qiu, Qirong},
  title = {Seismic performance and bearing capacity calculation of cross shaped concrete columns with built-in T-shaped steel and steel tubes},
  journal = {PLOS ONE},
  year = {2023},
  doi = {10.1371/journal.pone.0290426}
}
Kostenlos starten →