EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental and numerical investigation on the reinforced concrete boundary beam-wall system subjected to axial compression

Dae-Jin Kim iD, Jin-Ju Han, Seung-Il Kim iD

PLOS ONE · 2024

DOI: 10.1371/journal.pone.0301622 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PLOS ONE, 2024. Verfasst von Dae-Jin Kim und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Architectural Engineering, Kyung Hee University, Yongin, Gyeonggi, Republic of Korea. Hauptthemen laut MEDLINE: Construction Materials, Data Compression. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper proposes a reinforced concrete (RC) boundary beam-wall system that requires less construction material and a smaller floor height compared to the conventional RC transfer girder system. The structural performance of this system subjected to axial compression was evaluated by performing a structural test on four specimens of 1/2 scale. In addition, three-dimensional nonlinear finite element analysis was also performed to verify the effectiveness of the boundary beam-wall system. Three test parameters such as the lower wall length-to-upper wall length ratio, lower wall thickness, and stirrup details of the lower wall were considered. The load-displacement curve was plotted for each specimen and its failure mode was identified. The test results showed that decrease in the lower wall length-to-upper wall length ratio significantly reduced the peak strength of the boundary beam-wall system and difference in upper and lower wall thicknesses resulted in lateral bending caused by eccentricity in the out-of-plane direction. Additionally, incorporating cross-ties and reducing stirrup spacing in the lower wall significantly improved initial stiffness and peak strength, effectively minimizing stress concentration.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Construction MaterialsData CompressionFinite Element AnalysisPhysical Phenomena

Autor:innen und Institutionen

  • Department of Architectural Engineering, Kyung Hee University, Yongin, Gyeonggi, Republic of Korea.
  • Housing Construction Method Development Team, DL E&C, Ltd., Seoul, Republic of Korea.

ORCID-Profile: Dae-Jin Kim, Seung-Il Kim

Förderung

  • National Research Foundation of Korea

Zitieren

APA

Kim, D. J., Han, J. J., & Kim, S. I. (2024). Experimental and numerical investigation on the reinforced concrete boundary beam-wall system subjected to axial compression. PLOS ONE. https://doi.org/10.1371/journal.pone.0301622

Vancouver

Kim DJ, Han JJ, Kim SI. Experimental and numerical investigation on the reinforced concrete boundary beam-wall system subjected to axial compression. PLOS ONE. 2024. doi:10.1371/journal.pone.0301622

BibTeX
@article{Kim2024,
  author = {Kim, Dae-Jin and Han, Jin-Ju and Kim, Seung-Il},
  title = {Experimental and numerical investigation on the reinforced concrete boundary beam-wall system subjected to axial compression},
  journal = {PLOS ONE},
  year = {2024},
  doi = {10.1371/journal.pone.0301622}
}
Kostenlos starten →