Parametric study on the recast layer during EDWC of a Ni-rich NiTi shape memory alloy
Journal of Micromanufacturing · 2018-11 · 1 (2) · 134-141
DOI: 10.1177/2516598418766934 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Micromanufacturing, online erschienen am 18.05.2018. Verfasst von Pragya Shandilya und 2 weiteren Autor:innen. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 18 Literaturangaben.
Abstract (Originalsprache)
Shape memory alloys (SMAs) have exceptional properties, namely, shape memory effect, superelasticity and other enriched physical and mechanical properties. The conventional machining of these alloys is associated with several severe difficulties. Electric discharge wire cutting (EDWC), an advanced machining process, is utilized to machine Ni 50.89 Ti 49.11 SMA under this investigation. The aim of this investigation was to reveal the effect of EDWC variable parameters such as pulse on time ( T ON ), wire feed (WF) rate, spark gap voltage (SV), wire tension (WT) and pulse off time ( T OFF ) on recast-layer thickness (RLT) and a foreign element atomic content (FEAC) using the one-factor-at-a-time approach. Scanning electron microscope equipped with energy dispersive X-ray spectroscopy facility was utilized to analyse RLT and FEAC. RLT and FEAC are varied linearly and nonlinearly respectively with T ON , T OFF and SV. A thick recast layer with a high percentage of FEAC was formed on the machined surface of Ni 50.89 Ti 49.11 SMA at a higher T ON and a lower T OFF and SV. However, RLT and FEAC are slightly varied with WF and WT.
Zitieren
APA
Shandilya, P., Bisaria, H., & Jain, P. K. (2018). Parametric study on the recast layer during EDWC of a Ni-rich NiTi shape memory alloy. Journal of Micromanufacturing, 1(2), 134-141. https://doi.org/10.1177/2516598418766934
Vancouver
Shandilya P, Bisaria H, Jain PK. Parametric study on the recast layer during EDWC of a Ni-rich NiTi shape memory alloy. Journal of Micromanufacturing. 2018;1(2):134-141. doi:10.1177/2516598418766934
BibTeX
@article{Shandilya2018,
author = {Shandilya, Pragya and Bisaria, Himanshu and Jain, P. K.},
title = {Parametric study on the recast layer during EDWC of a Ni-rich NiTi shape memory alloy},
journal = {Journal of Micromanufacturing},
year = {2018},
volume = {1},
number = {2},
pages = {134--141},
doi = {10.1177/2516598418766934}
}
EUVIMED