EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Pull‐Out Testing of Electrochemically Etched NiTi Shape Memory Alloy Wires in Shape Memory Alloy Hybrid Composites

Anna Gapeeva, Julia Jungbluth, Berit Zeller‐Plumhoff, Julian Moosmann, Felix Beckmann, Stefan Bruns, Manuel Kunzler, Jürgen Carstensen, Rainer Adelung, Martin Gurka

Advanced Engineering Materials · 2024-05 · 26 (9)

DOI: 10.1002/adem.202301912 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Materials, online erschienen am 25.03.2024. Verfasst von Anna Gapeeva und 9 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft, Bundesministerium für Bildung und Forschung.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents an experimental characterization of the interface strength of the shape memory alloy hybrid composite (SMAHC) consisting of the two‐way effect NiTi shape memory alloy (SMA) wire structured by electrochemical etching and the surrounding thermoset matrix. Mechanically induced, in situ thermally induced, and cyclic load‐increase pull‐out tests consistently reveal that SMAHC with structured SMA wires outperforms those with as‐delivered SMA wires by a substantial factor of 2.6–2.7 in interfacial strength — the critical factor governing the overall performance and functionality of the composite. Analyzing the force–displacement curves from mechanically induced pull‐out tests demonstrates that structuring the SMA wire surface leads to a significantly increased elastic energy to initiate a crack and achieve complete failure. SMA wires with structured surfaces continue transferring load even after the initial interfacial failure due to the presence of intact mechanical interlocking sites. The cyclic load‐increase pull‐out test confirms that SMA wires with structured surfaces exhibit a significantly higher load‐bearing capacity, withstanding more load levels and demonstrating greater force of the first failure. Furthermore, in thermally induced pull‐out tests with structured SMA wires, a re‐initiation of failure from the lower side follows an initial failure progression at the SMA wire entry point.

Förderung

  • Deutsche Forschungsgemeinschaft
  • Bundesministerium für Bildung und Forschung

Zitieren

APA

Gapeeva, A., Jungbluth, J., Zeller‐Plumhoff, B., Moosmann, J., Beckmann, F., Bruns, S., Kunzler, M., Carstensen, J., Adelung, R., & Gurka, M. (2024). Pull‐Out Testing of Electrochemically Etched NiTi Shape Memory Alloy Wires in Shape Memory Alloy Hybrid Composites. Advanced Engineering Materials, 26(9). https://doi.org/10.1002/adem.202301912

Vancouver

Gapeeva A, Jungbluth J, Zeller‐Plumhoff B, Moosmann J, Beckmann F, Bruns S, et al. Pull‐Out Testing of Electrochemically Etched NiTi Shape Memory Alloy Wires in Shape Memory Alloy Hybrid Composites. Advanced Engineering Materials. 2024;26(9). doi:10.1002/adem.202301912

BibTeX
@article{Gapeeva2024,
  author = {Gapeeva, Anna and Jungbluth, Julia and Zeller‐Plumhoff, Berit and Moosmann, Julian and Beckmann, Felix and Bruns, Stefan and Kunzler, Manuel and Carstensen, Jürgen and Adelung, Rainer and Gurka, Martin},
  title = {Pull‐Out Testing of Electrochemically Etched NiTi Shape Memory Alloy Wires in Shape Memory Alloy Hybrid Composites},
  journal = {Advanced Engineering Materials},
  year = {2024},
  volume = {26},
  number = {9},
  doi = {10.1002/adem.202301912}
}
Kostenlos starten →