EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

A Review on Additive Manufacturing Methods for NiTi Shape Memory Alloy Production

Kristýna Kubášová iD, Veronika Drátovská, Monika Losertová iD, Pavel Salvetr iD, Michal Kopelent, Filip Kořínek, Vojtěch Havlas iD, Ján Džugan iD, Matej Daniel

Materials · 08.03.2024 · 17 (6) · 1248

DOI: 10.3390/ma17061248 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 08.03.2024. Verfasst von Kristýna Kubášová und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanics, Biomechanics and Mechatronics, Faculty of Mechanical Engineering, Czech Technical University in Prague, Technická 4, 160 00 …. Die Arbeit wurde bisher 72-mal zitiert (Crossref) und nennt 129 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Health of the Czech Republic, Ministry of Health, Czech Republic—conceptual development of research organization, Motol University Hospital.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The NiTi alloy, known as Nitinol, represents one of the most investigated smart alloys, exhibiting a shape memory effect and superelasticity. These, among many other remarkable attributes, enable its utilization in various applications, encompassing the automotive industry, aviation, space exploration, and, notably, medicine. Conventionally, Nitinol is predominantly produced in the form of wire or thin sheets that allow producing many required components. However, the manufacturing of complex shapes poses challenges due to the tenacity of the NiTi alloy, and different processing routes at elevated temperatures have to be applied. Overcoming this obstacle may be facilitated by additive manufacturing methods. This article provides an overview of the employment of additive manufacturing methods, allowing the preparation of the required shapes of Nitinol products while retaining their exceptional properties and potential applications.

Schlagwörter

Stichwörter der Autor:innen

NiTi alloyadditive manufacturingshape memory alloy

Autor:innen und Institutionen

  • Department of Mechanics, Biomechanics and Mechatronics, Faculty of Mechanical Engineering, Czech Technical University in Prague, Technická 4, 160 00 Prague, Czech Republic.
  • Department of Materials Engineering and Recycling, Faculty of Materials Science and Technology, VSB-Technical University of Ostrava, 17. listopadu 2172/15, 708 00 Ostrava, Czech Republic.
  • COMTES FHT a.s., Průmyslová 995, 334 41 Dobřany, Czech Republic.
  • Department of Orthopaedics and Traumatology, 2nd Faculty of Medicine, Charles University and Motol University Hospital, 150 06 Prague, Czech Republic.

ORCID-Profile: Kristýna Kubášová, Monika Losertová, Pavel Salvetr, Vojtěch Havlas, Ján Džugan

Förderung

  • Ministry of Health of the Czech Republic
  • Ministry of Health, Czech Republic—conceptual development of research organization, Motol University Hospital

Zitieren

APA

Kubášová, K., Drátovská, V., Losertová, M., Salvetr, P., Kopelent, M., Kořínek, F., Havlas, V., Džugan, J., & Daniel, M. (2024). A Review on Additive Manufacturing Methods for NiTi Shape Memory Alloy Production. Materials, 17(6), 1248. https://doi.org/10.3390/ma17061248

Vancouver

Kubášová K, Drátovská V, Losertová M, Salvetr P, Kopelent M, Kořínek F, et al. A Review on Additive Manufacturing Methods for NiTi Shape Memory Alloy Production. Materials. 2024;17(6):1248. doi:10.3390/ma17061248

BibTeX
@article{Kubov2024,
  author = {Kubášová, Kristýna and Drátovská, Veronika and Losertová, Monika and Salvetr, Pavel and Kopelent, Michal and Kořínek, Filip and Havlas, Vojtěch and Džugan, Ján and Daniel, Matej},
  title = {A Review on Additive Manufacturing Methods for NiTi Shape Memory Alloy Production},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {6},
  pages = {1248},
  doi = {10.3390/ma17061248}
}
Kostenlos starten →