EUVIMEDEUVIMED entdecken
Crossref

Proximal cementation of a collarless polished tapered hip stem: biomechanical analysis using a validated finite element model

Carol Sze Yee Ling, Aiman Izmin, Mitsugu Todo, Azhar M Merican, Desmond Y R Chong

Medical & Biological Engineering & Computing · 2024

DOI: 10.1007/s11517-024-03152-6 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Medical & Biological Engineering & Computing, 2024. Verfasst von Carol Sze Yee Ling und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthopaedic Surgery, Faculty of Medicine, University of Malaya, Kuala Lumpur, Malaysia. Hauptthemen laut MEDLINE: Finite Element Analysis, Hip Prosthesis, Cementation, Bone Cements. Die Arbeit nennt 32 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Total hip replacement (THR) with cemented stem is a common procedure for patients with hip osteoarthritis. When primary THR fails, removal of the cement is problematic and poses challenges during revision surgeries. The possibility of proximal partial cementing of the hip stem was explored to mitigate the problem. 3D finite element analysis was performed to investigate the feasibility of reduced cement length for effective implant fixation and load transmission. Three levels of cement reduction (40 mm, 80 mm, and 100 mm) in the femoral stem were evaluated. All models were assigned loadings of peak forces acting on the femur during walking and stair climbing. The experimental and predicted max/min principal bone strains were fitted into regression models and showed good correlations. FE results indicated stress increment in the femoral bone, stem, and cement due to cement reduction. A notable increase of bone stress was observed with large cement reduction of 80-100 mm, particularly in Gruen zones 3 and 5 during walking and Gruen zones 3 and 6 during stair climbing. The increase of cement stresses could be limited to 11% with a cement reduction of 40 mm. The findings suggested that a 40-mm cement reduction in hip stem fixation was desirable to avoid unwanted complications after cemented THR.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Finite Element AnalysisHip ProsthesisCementationBone CementsArthroplasty, Replacement, HipHumansBiomechanical PhenomenaStress, MechanicalFemurProsthesis Design

Stichwörter der Autor:innen

Cemented fixationFinite element analysisProximal cementingTotal hip replacementValidated FE model

Substanzen

Bone Cements

Autor:innen und Institutionen

  • Department of Orthopaedic Surgery, Faculty of Medicine, University of Malaya, Kuala Lumpur, Malaysia.
  • Interdisciplinary Graduate School of Engineering Sciences, Kyushu University, Fukuoka, Japan.
  • Research Institute for Applied Mechanics, Kyushu University, Fukuoka, Japan.
  • Department of Orthopaedic Surgery, Faculty of Medicine, University of Malaya, Kuala Lumpur, Malaysia. Desmond.Chong@SingaporeTech.edu.sg.
  • Engineering Cluster, Singapore Institute of Technology, 10 Dover Drive, Singapore, 138683, Singapore. Desmond.Chong@SingaporeTech.edu.sg.

Zitieren

APA

Ling, C. S. Y., Izmin, A., Todo, M., Merican, A. M., & Chong, D. Y. R. (2024). Proximal cementation of a collarless polished tapered hip stem: biomechanical analysis using a validated finite element model. Medical & Biological Engineering & Computing. https://doi.org/10.1007/s11517-024-03152-6

Vancouver

Ling CSY, Izmin A, Todo M, Merican AM, Chong DYR. Proximal cementation of a collarless polished tapered hip stem: biomechanical analysis using a validated finite element model. Medical & Biological Engineering & Computing. 2024. doi:10.1007/s11517-024-03152-6

BibTeX
@article{Ling2024,
  author = {Ling, Carol Sze Yee and Izmin, Aiman and Todo, Mitsugu and Merican, Azhar M and Chong, Desmond Y R},
  title = {Proximal cementation of a collarless polished tapered hip stem: biomechanical analysis using a validated finite element model},
  journal = {Medical & Biological Engineering & Computing},
  year = {2024},
  doi = {10.1007/s11517-024-03152-6}
}
Kostenlos starten →