What is the most appropriate comparator group to use in assessing the performance of primary total hip prostheses within the community?
HIP International · 2024
DOI: 10.1177/11207000231216708 ↗Kurz gefasst
Vergleichsstudie in der Zeitschrift HIP International, 2024. Verfasst von Khashayar Ghadirinejad und 6 weiteren Autor:innen. Beteiligte Einrichtung: The Medical Device Research Institute, College of Science and Engineering, Flinders University, Adelaide, SA, Australia. Hauptthemen laut MEDLINE: Hip Prosthesis, Arthroplasty, Replacement, Hip, Prosthesis Design, Reoperation. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
Background
There are variations in the performance of individual prostheses used in hip replacements. Some of which have unexpectedly higher revision rates – outliers. The Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR) has established a standardised multi-stage approach for identifying these devices. This is done by comparing the revision rates of individual prostheses to all other prostheses in class, with the exception of large head metal-on-metal (LHMoM) prostheses. However, improvements in device design and performance over time have required a need to reconsider the comparator group. This study aimed to identify a more specific comparator to better reflect contemporary surgical practice.
Methods
The time to first revision was estimated on the data of 413,417 primary total conventional hip replacements undertaken for osteoarthritis (OA) from 01 January 2003 to 31 December 2019. Survivorship analyses with stepwise exclusions were undertaken. The first exclusion was LHMoM, followed by other non-modern bearing surfaces (defined as all the bearing couples except metal or ceramic heads on cross-linked polyethylene and mixed ceramic-on-ceramic), and then devices with modular neck-stem design or used for specific purposes (incl. constrained, dual-mobility, and head size
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- The Medical Device Research Institute, College of Science and Engineering, Flinders University, Adelaide, SA, Australia.
- The Australian Orthopaedic Association National Joint Replacement Registry, Adelaide, SA, Australia.
- Department of Surgery, Epworth HealthCare, The University of Melbourne, Parkville, VIC, Australia.
- Quality Use of Medicines and Pharmacy Research Centre, School of Pharmacy and Medical Sciences, University of South Australia, Adelaide, SA, Australia.
- Centre for Orthopaedic and Trauma Research, University of Adelaide, Adelaide, SA, Australia.
- Department of Orthopaedics and Trauma, Royal Adelaide Hospital, Adelaide, SA, Australia.
Zitieren
APA
Ghadirinejad, K., Graves, S., de Steiger, R., Pratt, N., Solomon, L. B., Taylor, M., & Hashemi, R. (2024). What is the most appropriate comparator group to use in assessing the performance of primary total hip prostheses within the community?. HIP International. https://doi.org/10.1177/11207000231216708
Vancouver
Ghadirinejad K, Graves S, de Steiger R, Pratt N, Solomon LB, Taylor M, et al. What is the most appropriate comparator group to use in assessing the performance of primary total hip prostheses within the community?. HIP International. 2024. doi:10.1177/11207000231216708
BibTeX
@article{Ghadirinejad2024,
author = {Ghadirinejad, Khashayar and Graves, Stephen and de Steiger, Richard and Pratt, Nicole and Solomon, Lucian B and Taylor, Mark and Hashemi, Reza},
title = {What is the most appropriate comparator group to use in assessing the performance of primary total hip prostheses within the community?},
journal = {HIP International},
year = {2024},
doi = {10.1177/11207000231216708}
}
EUVIMED