EUVIMEDEUVIMED entdecken
Crossref

Experimental investigation on formability of heat-treatable aluminum alloy sheets during the electric hot forming in-die quenching process

Rushil Ratnakar Rao, Ajin Elias Alex, Sudhy S Panicker

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 16.11.2026

DOI: 10.1177/09544089261506768 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 16.11.2026. Verfasst von Rushil Ratnakar Rao und 2 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben. Gefördert von: Anusandhan National Research Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This experimental work investigates the formability improvement of peak tempered AA7075-T6 and AA6061-T6 sheets during the novel electric hot forming in-die quenching (EHFQ) process. Unlike the conventional HFQ®, the blank was placed directly within the forming station, rapidly resistance heated to 470 °C using an alternating current electric injection, and soaked at this temperature for 10 minutes. Limiting dome height (LDH) tests were performed at punch speeds of 10 and 36 mm/min to generate the forming limiting curves (FLCs) along plane strain to near-to-uniaxial strain paths. The EHFQ process significantly increased the LDHs, improved thickness and strain distribution patterns, and overall formability. The FLC 0 increased by approximately 100% and 70.6% for AA7075 and AA6061, respectively, when compared to room temperature (RT). Even though bending-corrected-FLCs exhibited a marginal downward shift, the significant improvement in formability was evident. Scanning electron microscopy (SEM) and Energy dispersive X-ray spectroscopy (EDS) analyses indicated the dissolution of strengthening precipitates during the electro-thermal pre-heating stage. The Vickers hardness was reduced by 34.8% and 49.15% for AA7075 and AA6061, respectively, compared to that at RT. The SEM fractography revealed a higher density of shallow and deep dimples, hinting enhanced ductile fracture behavior, resulting in enhanced stretch formability especially for EHFQ at 36 mm/min. A post-forming heat-treatment substantially recovered the precipitation hardening with hardness nearing to the alloy-specific T6 temper. Overall, the combined benefits of improved formability and recovery of precipitation hardening favored AA7075 compared to AA6061.

Förderung

  • Anusandhan National Research Foundation

Zitieren

APA

Rao, R. R., Alex, A. E., & Panicker, S. S. (2026). Experimental investigation on formability of heat-treatable aluminum alloy sheets during the electric hot forming in-die quenching process. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. https://doi.org/10.1177/09544089261506768

Vancouver

Rao RR, Alex AE, Panicker SS. Experimental investigation on formability of heat-treatable aluminum alloy sheets during the electric hot forming in-die quenching process. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2026. doi:10.1177/09544089261506768

BibTeX
@article{Rao2026,
  author = {Rao, Rushil Ratnakar and Alex, Ajin Elias and Panicker, Sudhy S},
  title = {Experimental investigation on formability of heat-treatable aluminum alloy sheets during the electric hot forming in-die quenching process},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
  year = {2026},
  doi = {10.1177/09544089261506768}
}
Kostenlos starten →