Gas Based Hot Forming of Micro-Channels for High Strength Aluminum Alloy Sheets
Solid State Phenomena · 16.04.2026 · 389 · 143-150
DOI: 10.4028/p-fi1xwz ↗Kurz gefasst
Fachartikel in der Zeitschrift Solid State Phenomena, online erschienen am 16.04.2026. Verfasst von Karl J. Tilly und 2 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In carbon-free technologies, thin-walled components with microchannels from ultra-thin sheets, such as bipolar plates, cooling plates, and heat exchangers, are widely utilized. Using such components made of high-strength aluminum alloys further reduces the required wall thickness, thereby enhancing their lightweight potential. However, conventional forming methods for ultra-thin sheets, including elastomer-based deep drawing and hydroforming, are limited by process-induced phenomena such as springback, geometrical inaccuracies and reduced formability as well as localized thinning, which can necessitate a higher wall thickness or the use of a lower strength grade alloy. Gas-based hot sheet metal forming of high-strength aluminum alloys is introduced to improve formability and geometrical accuracy. In the present study, an isothermal, gas-based hot sheet metal forming process is developed for forming microchannels from AlMg3 alloy sheets with a thickness of 0.4 mm. A 100 mm × 100 mm blank is heated to 530 °C and formed under nitrogen gas pressure into a heated die featuring various channel geometries. The effects of blank-holder force, maximum gas pressure, wall angle, channel radius, and maximum channel depth on thinning and form filling are investigated. Additionally, the grain size of the final component is analyzed. A full form filling can be reached under a forming pressure of 200 bar. The thinning is dependent on the micro channel geometry and reaches a maximum of 29 % for a channel depth of 1 mm. The grain size increases during the forming process, dependent on the introduced strain into the material. The proposed method enables forming of components without fracture and with high geometrical accuracy.
Zitieren
APA
Tilly, K. J., Scharifi, E., & Lian, J. (2026). Gas Based Hot Forming of Micro-Channels for High Strength Aluminum Alloy Sheets. Solid State Phenomena, 389, 143-150. https://doi.org/10.4028/p-fi1xwz
Vancouver
Tilly KJ, Scharifi E, Lian J. Gas Based Hot Forming of Micro-Channels for High Strength Aluminum Alloy Sheets. Solid State Phenomena. 2026;389:143-150. doi:10.4028/p-fi1xwz
BibTeX
@article{Tilly2026,
author = {Tilly, Karl J. and Scharifi, Emad and Lian, Junhe},
title = {Gas Based Hot Forming of Micro-Channels for High Strength Aluminum Alloy Sheets},
journal = {Solid State Phenomena},
year = {2026},
volume = {389},
pages = {143--150},
doi = {10.4028/p-fi1xwz}
}
EUVIMED