EUVIMEDEUVIMED entdecken
Crossref

Design and experimental validation of a passive thermal-displacement compensation module for a compliant parallel mechanism

Feng Yue, Shuaishuai Cao, Zhenguo Meng, Shihua Li

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science · 10.11.2026

DOI: 10.1177/09544062261501673 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, online erschienen am 10.11.2026. Verfasst von Feng Yue und 3 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Gefördert von: Scientific and Technological Research and Development Program of Hebei ProvinceCentralGuided Local Science and Technology Development Funds, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address the degradation of motion accuracy in compliant parallel mechanisms caused by temperature variations, this study proposes a passive temperature-compensation module design method based on equivalent compliance matrix incorporating thermal effects. Thermally induced deformation is introduced into the compliance formulation in an equivalent manner, and design relationships are established among the thermal deformation characteristics, compensation directions, required compensation, and structural parameters of the compensation module. This extends thermal deformation modeling toward structure-level error suppression. A temperature-compensation module is designed and integrated into a 4-PPSP compliant parallel mechanism, and its 2R1T motion mode is theoretically and experimentally investigated. Under the controlled temperature differences considered, the proposed compensation reduces the thermally induced displacement error along the z -axis by 70.41% and the thermally induced angular errors about the x - and y -axes by approximately 65.6%, while the output displacement errors in all directions remain below 6%. These results demonstrate the effectiveness of the proposed method under the present experimental conditions and provide a new design approach for structure-level passive suppression of thermally induced errors in compliant parallel mechanisms.

Förderung

  • Scientific and Technological Research and Development Program of Hebei ProvinceCentralGuided Local Science and Technology Development Funds
  • National Natural Science Foundation of China

Zitieren

APA

Yue, F., Cao, S., Meng, Z., & Li, S. (2026). Design and experimental validation of a passive thermal-displacement compensation module for a compliant parallel mechanism. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. https://doi.org/10.1177/09544062261501673

Vancouver

Yue F, Cao S, Meng Z, Li S. Design and experimental validation of a passive thermal-displacement compensation module for a compliant parallel mechanism. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2026. doi:10.1177/09544062261501673

BibTeX
@article{Yue2026,
  author = {Yue, Feng and Cao, Shuaishuai and Meng, Zhenguo and Li, Shihua},
  title = {Design and experimental validation of a passive thermal-displacement compensation module for a compliant parallel mechanism},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science},
  year = {2026},
  doi = {10.1177/09544062261501673}
}
Kostenlos starten →