Passive Gravity Compensation for Robot Manipulator Joints Using a Compression Spring–Cam Mechanism: Modeling, Design, and Experimental Validation
Mathematics · 02.11.2026 · 14 (21) · 3998
DOI: 10.3390/math14213998 ↗Kurz gefasst
Fachartikel in der Zeitschrift Mathematics, online erschienen am 02.11.2026. Verfasst von Seung-Min Lee und 1 weiteren Autor:innen. Die Arbeit nennt 12 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Institute of Civil-Military Technology Cooperation.
Abstract (Originalsprache)
Gravitational torque at manipulator joints persists even at rest and thus determines the continuous torque rating of the actuator. This study developed and validated a passive gravity-compensation joint wherein a cam plate extends a compression-spring link with an offset pin joint. Spring torque was derived by virtual work for an arbitrary cam profile, and the pitch curve was distinguished from the machined surface by a normal-offset correction omitted under the point-contact assumption. Because each harmonic coefficient of the Fourier-parameterized profile contributes to curvature with a weight proportional to the square of its order, raising the order trades curvature for accuracy: over the converged orders, the minimum curvature radius (the largest follower admitted without undercutting) fell by 20–34% while the residual fell 4.5- to 6.9-fold. Attainable accuracy was governed not by stiffness but by whether the springs can store the gravitational energy within their allowable stroke. A 5 kg prototype reduced the peak joint torque by 73.2% on the hysteresis-removed basis but by 20.8% in actuator demand, which includes friction. The measured spring torque matched the model within 5%; half the shortfall from simulation stemmed from a load 11% above design, and the gap between bases from sliding friction.
Förderung
- Institute of Civil-Military Technology Cooperation
Zitieren
APA
Lee, S., & Yoo, S. (2026). Passive Gravity Compensation for Robot Manipulator Joints Using a Compression Spring–Cam Mechanism: Modeling, Design, and Experimental Validation. Mathematics, 14(21), 3998. https://doi.org/10.3390/math14213998
Vancouver
Lee S, Yoo S. Passive Gravity Compensation for Robot Manipulator Joints Using a Compression Spring–Cam Mechanism: Modeling, Design, and Experimental Validation. Mathematics. 2026;14(21):3998. doi:10.3390/math14213998
BibTeX
@article{Lee2026,
author = {Lee, Seung-Min and Yoo, Seong-yeol},
title = {Passive Gravity Compensation for Robot Manipulator Joints Using a Compression Spring–Cam Mechanism: Modeling, Design, and Experimental Validation},
journal = {Mathematics},
year = {2026},
volume = {14},
number = {21},
pages = {3998},
doi = {10.3390/math14213998}
}
EUVIMED