EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Experimental Validation of a Flexible-Hinge-Based Manual Mechanism for Micro/Nano-Displacement Scaling

Songling Tian, Meirun Gao, Yiyi Fu, Chenkai Fang, Xiaofan Deng iD, Liangyu Cui iD

Micromachines · 05.03.2026 · 17 (3) · 323

DOI: 10.3390/mi17030323 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 05.03.2026. Verfasst von Songling Tian und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Control and Mechanical Engineering, Tianjin Chengjian University, Tianjin 300384, China. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Tianjin Enterprise Science and Technology Commissioner Project, Tianjin Tiankai Higher Education Science and Technology Innovation Park Enterprise R&D Special Project, Tianjin Metrology Technology Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, a low-cost manual micro- and nano-displacement adjustment mechanism is proposed, based on the principle of flexible hinge transmission and micro-displacement scaling. The manual micro- and nano-displacement platform consists of a micrometer input platform, a nano-output platform, a differential head, and a strain displacement sensor. Firstly, a micro-displacement reduction mechanism based on a flexible beam triangular mechanism and a compact asymmetric flexible beam guiding mechanism are proposed, and a theoretical model is established for static mechanical characteristics, such as the displacement reduction multiplier, guiding stiffness, maximum stress, etc., and this is analyzed and verified by finite element simulation. The software and hardware system of the strain displacement sensor is designed and developed, and the calibration experiments of the strain displacement sensor are completed. Finally, the micro-displacement reduction times, resolution, stability, repeat positioning accuracy, load capacity and travel of the manual micro–nano-displacement platform were analyzed and experimented. The results show that when the input range of the micrometer input platform is 0–1 mm, the travel of the nano-output platform is about 0–16 μm; when a differential head with a step resolution of 2 μm is used to input 2 μm micro-displacement, the minimum displacement output of the nano-output platform is about 35.4 nm; the theoretical and simulated values of the reduction multiple of the micro–nano-displacement are 57.29 and 56.69, respectively; the calibration experiment is performed by the self-developed strain sensors, and capacitive displacement sensors measured the reduction multiples of 57.74 and 62.67, respectively, with high consistency; the vibration range of the platform after the displacement adjustment is about ±30 nm, and the load of 0–300 g has less influence on the output characteristics of the platform.

Schlagwörter

Stichwörter der Autor:innen

displacement reduction mechanismflexible hingeguiding mechanismnano-positioningstrain displacement measurement

Autor:innen und Institutionen

  • School of Control and Mechanical Engineering, Tianjin Chengjian University, Tianjin 300384, China.
  • School of Mechanical Engineering, Tianjin University of Technology and Education, Tianjin 300222, China.
  • Tianjin Key Laboratory of High Performance Manufacturing Technology & Equipment, Tianjin 300222, China.
  • School of Mechanical Engineering, Tianjin University, Tianjin 300072, China.

ORCID-Profile: Xiaofan Deng, Liangyu Cui

Förderung

  • Tianjin Enterprise Science and Technology Commissioner Project
  • Tianjin Tiankai Higher Education Science and Technology Innovation Park Enterprise R&D Special Project
  • Tianjin Metrology Technology Project
  • Tianjin Science and Technology Program Project

Zitieren

APA

Tian, S., Gao, M., Fu, Y., Fang, C., Deng, X., & Cui, L. (2026). Design and Experimental Validation of a Flexible-Hinge-Based Manual Mechanism for Micro/Nano-Displacement Scaling. Micromachines, 17(3), 323. https://doi.org/10.3390/mi17030323

Vancouver

Tian S, Gao M, Fu Y, Fang C, Deng X, Cui L. Design and Experimental Validation of a Flexible-Hinge-Based Manual Mechanism for Micro/Nano-Displacement Scaling. Micromachines. 2026;17(3):323. doi:10.3390/mi17030323

BibTeX
@article{Tian2026,
  author = {Tian, Songling and Gao, Meirun and Fu, Yiyi and Fang, Chenkai and Deng, Xiaofan and Cui, Liangyu},
  title = {Design and Experimental Validation of a Flexible-Hinge-Based Manual Mechanism for Micro/Nano-Displacement Scaling},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {3},
  pages = {323},
  doi = {10.3390/mi17030323}
}
Kostenlos starten →