EUVIMEDEUVIMED entdecken
Crossref

Silicon carbide nanowhisker-polymer nanocomposite thin films as effective susceptors for advanced microwave welding of polypropylene

Phey Yee Foong, Chun Hong Voon, Bee Ying Lim, Pei Leng Teh, Cheow Keat Yeoh, Nor Azizah Parmin, Subash C. B. Gopinath, Muhammad Mahyiddin Ramli, Foo Wah Low, Nor Azura Abdul Rahim, Sung Ting Sam, Veeradasan Perumal

Journal of Reinforced Plastics and Composites · 16.11.2026

DOI: 10.1177/07316844261500293 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Reinforced Plastics and Composites, online erschienen am 16.11.2026. Verfasst von Phey Yee Foong und 11 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Gefördert von: Fundamental Research Grant Scheme.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Microwave susceptors in the form of powder are prone to agglomeration, uneven heating, and airborne handling hazards, which limit the consistency of microwave-welded thermoplastic joints. We previously introduced a silicon carbide nanowhisker (SiCNW)/poly(methyl methacrylate) (PMMA) nanocomposite thin film as an alternative susceptor and showed how SiCNW loading and heating duration affect joint performance. In this study, the SiCNW loading and heating duration were fixed at the previously optimized 40 wt% and 50 s. We examined how microwave power and clamping pressure govern the mechanical properties and interfacial microstructure of polypropylene (PP) joints welded with this thin-film susceptor. Tensile strength and flexural modulus both increased with microwave power, while flexural strength decreased. Tensile strength rose as clamping pressure increased from 364.93 Pa to 729.86 Pa, then declined at 1094.80 Pa and 1459.73 Pa as the welded area thinned under excess clamping pressure. At its best combination of parameters, the thin-film susceptor produced a 20.36% higher tensile strength than joints welded with SiCNW powder, which we attribute to more uniform heating and the SiCNW/PP nanocomposite layer formed at the joining interface. Cross-sectional SEM-EDX analysis confirmed that this layer thickens with increasing microwave power and clamping pressure, which matches the trends observed in the mechanical properties. These findings complete our earlier work on this susceptor system and support its use as an adhesive-free joining method for thermoplastics.

Förderung

  • Fundamental Research Grant Scheme

Zitieren

APA

Foong, P. Y., Voon, C. H., Lim, B. Y., Teh, P. L., Yeoh, C. K., Parmin, N. A., Gopinath, S. C. B., Ramli, M. M., Low, F. W., Rahim, N. A. A., Sam, S. T., & Perumal, V. (2026). Silicon carbide nanowhisker-polymer nanocomposite thin films as effective susceptors for advanced microwave welding of polypropylene. Journal of Reinforced Plastics and Composites. https://doi.org/10.1177/07316844261500293

Vancouver

Foong PY, Voon CH, Lim BY, Teh PL, Yeoh CK, Parmin NA, et al. Silicon carbide nanowhisker-polymer nanocomposite thin films as effective susceptors for advanced microwave welding of polypropylene. Journal of Reinforced Plastics and Composites. 2026. doi:10.1177/07316844261500293

BibTeX
@article{Foong2026,
  author = {Foong, Phey Yee and Voon, Chun Hong and Lim, Bee Ying and Teh, Pei Leng and Yeoh, Cheow Keat and Parmin, Nor Azizah and Gopinath, Subash C. B. and Ramli, Muhammad Mahyiddin and Low, Foo Wah and Rahim, Nor Azura Abdul and Sam, Sung Ting and Perumal, Veeradasan},
  title = {Silicon carbide nanowhisker-polymer nanocomposite thin films as effective susceptors for advanced microwave welding of polypropylene},
  journal = {Journal of Reinforced Plastics and Composites},
  year = {2026},
  doi = {10.1177/07316844261500293}
}
Kostenlos starten →