Photoluminescence of Polymer‐Derived Silicon Carbide Thin Film Fabricated at Different Temperatures
Journal of the American Ceramic Society · 2026-07 · 109 (7)
DOI: 10.1111/jace.71018 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of the American Ceramic Society, online erschienen am 13.07.2026. Verfasst von Ajitesh Kar und 3 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben.
Abstract (Originalsprache)
Doped silicon carbide (SiC) thin films were deposited on Si (111) substrates via chemical vapor deposition (CVD) employing a boron‐modified liquid polycarbosilane (LPCS) precursor through a polymer‐derived ceramic (PDC) approach. The films were synthesized at 800°C, 900°C, and 1000°C to elucidate the influence of processing temperature on structural and optical properties. Comprehensive structural characterization using x‐ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and x‐ray photoelectron spectroscopy (XPS) confirms the formation of Si–C and Si–N bonds along with notable silicon carbonitride (SiC–N) phases and the formation of nanocrystalline β‐3C SiC embedded within an amorphous SiC x N y matrix, with successful incorporation of boron and nitrogen dopants. Optical investigations reveal stable visible‐range photoluminescence with enhanced quantum efficiency and improved lifetime. Optical studies revealed a reduction in optical bandgap from 3.60 to 3.43 eV, accompanied by an increase in Urbach energy, indicating enhanced defect‐assisted electronic states. All films exhibited broadband photoluminescence spanning the visible region (350–750 nm), producing white light emission originating from donor–acceptor pair recombination and defect‐related transitions. The film deposited at 1000°C showed the highest emission intensity and prolonged lifetime (∼644 ps), whereas the film deposited at 900°C exhibited the maximum quantum yield (∼24.3%). The enhanced optical performance is attributed to the synergistic effects of nanocrystalline SiC formation, defect engineering, and B–N co‐doping. These results demonstrate the potential of polymer‐derived SiC x N y thin films as efficient visible‐light emitters. These attributes underscore the potential of the developed SiC‐based thin films for optoelectronic applications, particularly in light‐emitting devices (LEDs).
Zitieren
APA
Kar, A., Kundu, K., Chattopadhyay, H., & Banerjee, R. (2026). Photoluminescence of Polymer‐Derived Silicon Carbide Thin Film Fabricated at Different Temperatures. Journal of the American Ceramic Society, 109(7). https://doi.org/10.1111/jace.71018
Vancouver
Kar A, Kundu K, Chattopadhyay H, Banerjee R. Photoluminescence of Polymer‐Derived Silicon Carbide Thin Film Fabricated at Different Temperatures. Journal of the American Ceramic Society. 2026;109(7). doi:10.1111/jace.71018
BibTeX
@article{Kar2026,
author = {Kar, Ajitesh and Kundu, Kusumita and Chattopadhyay, Himadri and Banerjee, Rajat},
title = {Photoluminescence of Polymer‐Derived Silicon Carbide Thin Film Fabricated at Different Temperatures},
journal = {Journal of the American Ceramic Society},
year = {2026},
volume = {109},
number = {7},
doi = {10.1111/jace.71018}
}
EUVIMED