EUVIMEDEUVIMED entdecken
Crossref

Characterization of silicon carbide thin films deposited by PECVD and PLD for MEMS infrared applications

Mohammed Mahdi, Lamia Menasri, Hammouche Khales, Katia Chouarbi, Yassine Djeridane

Applied Physics A · 2026-09 · 132 (9)

DOI: 10.1007/s00339-026-10053-y ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Physics A, online erschienen am 24.08.2026. Verfasst von Mohammed Mahdi und 4 weiteren Autor:innen. Die Arbeit nennt 16 Literaturangaben. Gefördert von: Direction Générale de la Recherche Scientifique et du Développement Technologique.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Silicon carbide (SiC) is a promising material for uncooled infrared (IR) Micro-Electro-Mechanical Systems (MEMS) owing to its high elastic modulus, thermal stability, and infrared absorption properties [1–3]. In this work, we report a comparative characterization of 500 nm thick SiC thin films deposited by Plasma-Enhanced Chemical Vapor Deposition (PECVD) and Pulsed Laser Deposition (PLD), with the objective of evaluating their suitability as structural and absorbing layers in bi-material MEMS microcantilever-based IR sensors [4–5]. Fourier Transform Infrared (FTIR) spectroscopy confirms the formation of Si–C bonds, with absorption peaks centered at ~ 775.7 cm⁻¹ for PECVD films and ~ 807.3 cm⁻¹ for PLD films, while revealing the influence of hydrogen and carbon content on bonding configurations in PECVD layers [8–11]. Film thickness and refractive index were measured by ellipsometry, and mechanical properties were evaluated by nanoindentation, showing Young’s modulus values ranging from 170 to 190 GPa for PLD films and 114 to 124 GPa for the annealed PECVD films. The results highlight the strong dependence of mechanical performance on deposition technique and bonding density. These results demonstrate that PECVD- and PLD-deposited SiC thin films exhibit promising optical and mechanical properties for use as structural and absorbing layers in MEMS infrared microcantilevers. Nevertheless, further characterization of residual stress, thermal properties, and device performance is required for complete validation.

Förderung

  • Direction Générale de la Recherche Scientifique et du Développement Technologique

Zitieren

APA

Mahdi, M., Menasri, L., Khales, H., Chouarbi, K., & Djeridane, Y. (2026). Characterization of silicon carbide thin films deposited by PECVD and PLD for MEMS infrared applications. Applied Physics A, 132(9). https://doi.org/10.1007/s00339-026-10053-y

Vancouver

Mahdi M, Menasri L, Khales H, Chouarbi K, Djeridane Y. Characterization of silicon carbide thin films deposited by PECVD and PLD for MEMS infrared applications. Applied Physics A. 2026;132(9). doi:10.1007/s00339-026-10053-y

BibTeX
@article{Mahdi2026,
  author = {Mahdi, Mohammed and Menasri, Lamia and Khales, Hammouche and Chouarbi, Katia and Djeridane, Yassine},
  title = {Characterization of silicon carbide thin films deposited by PECVD and PLD for MEMS infrared applications},
  journal = {Applied Physics A},
  year = {2026},
  volume = {132},
  number = {9},
  doi = {10.1007/s00339-026-10053-y}
}
Kostenlos starten →