EUVIMEDEUVIMED entdecken
Crossref

Preparation and mechanical and microwave absorption property characterization of polymethacrylimide foam reinforced with a multiwalled carbon nanotube/carbon black hybrid

Yu Liao, Shijun Song, Lei Liu, Zhaogang Cheng, Chao Xiong, Xue Du, Junhui Yin, Yu Zhang

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications · 10.11.2026

DOI: 10.1177/14644207261506720 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, online erschienen am 10.11.2026. Verfasst von Yu Liao und 7 weiteren Autor:innen. Die Arbeit nennt 55 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To meet the growing demand for materials integrating structural load-bearing capability with radar stealth functionality, a lightweight microwave-absorbing polymethacrylimide foam reinforced with a hybrid system comprising multiwalled carbon nanotubes (MWCNTs) and carbon black (CB) was developed in this study. By optimizing the composition of the hybrid absorber and employing a bulk polymerization–foaming strategy, a continuous and stable conductive network was constructed within the foam cell walls while maintaining favorable processability and low density. The dispersion behavior of the hybrid absorber; effects of initiator composition on polymerization and foamingas well as the microstructure, electromagnetic properties, and mechanical performance of the composite foam were systematically investigated. Among the three formulations investigated, the composite foam with 1.5 wt% MWCNTs and 1 wt% CB exhibited the best broadband microwave absorption, showing a minimum reflection loss of −33 dB at ∼7 GHz (thickness of 20 mm) and an effective absorption bandwidth of 14 GHz covering 4–18 GHz (at a thickness of 50 mm).At the same time, the foam maintained a low density (approximately 80 kg·m −3 ), together with outstanding compressive specific strength (2.18 × 10 4 m 2 /s 2 ) and specific modulus (1.42 × 10 6 m 2 /s 2 ) (i.e., compressive strength and modulus normalized by density, respectively), outperforming most previously reported carbon-based absorber foams. This high performance was attributed to the synergy between MWCNTs and CB, which enabled balanced impedance matching and electromagnetic attenuation while reinforcing the cellular structure. Thus, this work provides practical insights into the design of multifunctional structural absorbers combining mechanical robustness and broadband microwave absorption for advanced engineering applications.

Zitieren

APA

Liao, Y., Song, S., Liu, L., Cheng, Z., Xiong, C., Du, X., Yin, J., & Zhang, Y. (2026). Preparation and mechanical and microwave absorption property characterization of polymethacrylimide foam reinforced with a multiwalled carbon nanotube/carbon black hybrid. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. https://doi.org/10.1177/14644207261506720

Vancouver

Liao Y, Song S, Liu L, Cheng Z, Xiong C, Du X, et al. Preparation and mechanical and microwave absorption property characterization of polymethacrylimide foam reinforced with a multiwalled carbon nanotube/carbon black hybrid. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 2026. doi:10.1177/14644207261506720

BibTeX
@article{Liao2026,
  author = {Liao, Yu and Song, Shijun and Liu, Lei and Cheng, Zhaogang and Xiong, Chao and Du, Xue and Yin, Junhui and Zhang, Yu},
  title = {Preparation and mechanical and microwave absorption property characterization of polymethacrylimide foam reinforced with a multiwalled carbon nanotube/carbon black hybrid},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications},
  year = {2026},
  doi = {10.1177/14644207261506720}
}
Kostenlos starten →