EUVIMEDEUVIMED entdecken
Crossref

Morphologic Analysis of Zirconia Ceramics: Effect of Different Surface Treatments

Chao Chen, Cong Cao, Xun Yan, Bao Hua Xu

The International Journal of Periodontics & Restorative Dentistry · 2023

DOI: 10.11607/prd.6318 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Periodontics & Restorative Dentistry, 2023. Verfasst von Chao Chen und 3 weiteren Autor:innen. Hauptthemen laut MEDLINE: Dental Bonding. Die Arbeit wurde bisher 1-mal zitiert (Crossref).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

To investigate the effects of airborne-particle abrasion and nanosilica (nano-Si) infiltration treatment on the surface characteristics of dental zirconia. Materials and Methods: A total of 15 unsintered zirconia ceramic green bodies (10 × 10 × 3 mm) were divided into three groups (n = 5): Group C, no treatment after sintering; Group S, airborne-particle abrasion with 50-μm aluminum oxide particles after sintering; and Group N, infiltration of nano-Si followed by sintering and hydrofluoric acid (HF) etching. The zirconia disks’ surface roughness was analyzed by atomic force microscopy (AFM). The surface morphology of the specimens was analyzed using scanning electron microscopy (SEM), and the chemical composition was analyzed by energy-dispersive x-ray (EDX). Data were statistically analyzed by the Kruskal-Wallis test (P < .05).

Results

Zirconia surface treatments by infiltration of nano-Si, sintering, and HF etching showed multiple changes in the surface features. The surface roughness of Groups C, S, and N were 0.88 ± 0.07 μm, 1.26 ± 0.10 μm, and 1.69 ± 0.15 μm, respectively. The surface roughness of Group N was significantly higher than that of Groups C and S (P < .05). EDX analysis showed peaks that corresponded to silica (Si) after infiltration with colloidal Si that disappeared following acid etching.

Conclusions

Infiltrating nano-Si increases the surface roughness of zirconia. The formation of retentive nanopores on the surface potentially improves the zirconia–resin cement bonding strengths.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Dental BondingHumansSurface PropertiesCeramicsZirconiumResin CementsAluminum OxideMaterials TestingMicroscopy, Electron, ScanningDental Etching

Substanzen

zirconium oxideZirconiumResin CementsAluminum Oxide

Zitieren

APA

Chen, C., Cao, C., Yan, X., & Xu, B. H. (2023). Morphologic Analysis of Zirconia Ceramics: Effect of Different Surface Treatments. The International Journal of Periodontics & Restorative Dentistry. https://doi.org/10.11607/prd.6318

Vancouver

Chen C, Cao C, Yan X, Xu BH. Morphologic Analysis of Zirconia Ceramics: Effect of Different Surface Treatments. The International Journal of Periodontics & Restorative Dentistry. 2023. doi:10.11607/prd.6318

BibTeX
@article{Chen2023,
  author = {Chen, Chao and Cao, Cong and Yan, Xun and Xu, Bao Hua},
  title = {Morphologic Analysis of Zirconia Ceramics: Effect of Different Surface Treatments},
  journal = {The International Journal of Periodontics & Restorative Dentistry},
  year = {2023},
  doi = {10.11607/prd.6318}
}
Kostenlos starten →