EUVIMEDEUVIMED entdecken
Crossref

Evaluation of Passivity of Co-Cr Complete Arch Screw Retained Maxillary Prostheses Using Different Intraoral Scanners With the Aid of Auxiliary Geometric Device

Yasmin Hamdy Abd El Hay Dawoud, Heba Shawky Eid, Omar El Sadat, Dina Essam, Rami Maher Ghali

The International Journal of Oral & Maxillofacial Implants · 2026-05 · 1-22

DOI: 10.11607/jomi.11793 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Oral & Maxillofacial Implants, 2026-05. Verfasst von Yasmin Hamdy Abd El Hay Dawoud und 4 weiteren Autor:innen.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

PURPOSE: To evaluate the influence of an auxiliary geometric device (AGD) on the accuracy of complete-arch digital scans in edentulous patients by measuring the passivity of fit of 3D-printed frameworks. MATERIALS AND METHODS: In this in vivo study, 7 patients were selected to receive complete arch screw-retained prostheses supported by 4 implants. Five data acquisition methods were compared: extraoral scanning of open-tray impressions (EO), intraoral scanning using Medit i600 (M) or CEREC Primescan (P), and intraoral scanning with an auxiliary geometric device using Medit (MAGD) and Primescan (PAGD). Reference models were generated using intraoral photogrammetry to assess passivity. Cobalt-Chromium frameworks were 3D printed for each group. Passivity was assessed using a modified one-screw test to measure marginal gaps (μm) by using digital imaging (in vitro) and radiographic analysis (in vivo). Data were analyzed using One-way ANOVA followed by Tukey's post-hoc tests. (α=.05 for all tests). RESULTS: Significant inter-group differences were found (P=.001). Microscopic analysis showed the lowest marginal gap in the EO group (25.07±7.77 μm), followed by PAGD (33.58±5.63 μm), and MAGD (50.34±13.71 μm). Groups P (60.91±13.41 μm) and M (71.84±12.44 μm) exhibited the largest gaps and were not significantly different (P>.05). Radiographic findings were similar to microscopic. However, EO (56.92±16.62 μm) and PAGD (68.68±18.91 μm) groups were statistically comparable (P>.05). CONCLUSIONS: The use of an auxiliary geometric device significantly improved the accuracy of digital scans for edentulous arches. Intraoral scanner, Primescan combined with a geometric device achieved passivity levels comparable to conventional splinted impressions.

Schlagwörter

Stichwörter der Autor:innen

Auxiliary geometric deviceall on 4 implantsintraoral scannersmodified one-screw test

Zitieren

APA

Dawoud, Y. H. A. E. H., Eid, H. S., Sadat, O. E., Essam, D., & Ghali, R. M. (2026). Evaluation of Passivity of Co-Cr Complete Arch Screw Retained Maxillary Prostheses Using Different Intraoral Scanners With the Aid of Auxiliary Geometric Device. The International Journal of Oral & Maxillofacial Implants, 1-22. https://doi.org/10.11607/jomi.11793

Vancouver

Dawoud YHAEH, Eid HS, Sadat OE, Essam D, Ghali RM. Evaluation of Passivity of Co-Cr Complete Arch Screw Retained Maxillary Prostheses Using Different Intraoral Scanners With the Aid of Auxiliary Geometric Device. The International Journal of Oral & Maxillofacial Implants. 2026:1-22. doi:10.11607/jomi.11793

BibTeX
@article{Dawoud2026,
  author = {Dawoud, Yasmin Hamdy Abd El Hay and Eid, Heba Shawky and Sadat, Omar El and Essam, Dina and Ghali, Rami Maher},
  title = {Evaluation of Passivity of Co-Cr Complete Arch Screw Retained Maxillary Prostheses Using Different Intraoral Scanners With the Aid of Auxiliary Geometric Device},
  journal = {The International Journal of Oral & Maxillofacial Implants},
  year = {2026},
  pages = {1--22},
  doi = {10.11607/jomi.11793}
}
Kostenlos starten →