Screw Preload Analysis in a Repeated Torque of Variobase Type Abutments
The International Journal of Prosthodontics · 2026-06 · 1-35
DOI: 10.11607/ijp.9746 ↗Kurz gefasst
Fachartikel in der Zeitschrift The International Journal of Prosthodontics, 2026-06. Verfasst von Žygimantas Guobis und 3 weiteren Autor:innen.
Abstract (Originalsprache)
OBJECTIVES: This study aimed to quantify preload efficiency (PE%) and tightening/releasing energy (Et/Er) during ten repeated torque cycles in four Variobase type implant-abutment assemblies. MATERIALS AND METHODS: Twelve Straumann implants were assembled with Variobase type abutments representing four implant-abutment interface configurations: Regular-Neck Crown (RNC), Regular-Neck Bridge (RNB), Regular CrossFit Crown (RCC), and Regular CrossFit Bridge (RCB). Each assembly underwent ten consecutive tightening-loosening cycles at 35 Ncm using an ElectroPuls E10000 linear-torsion testing machine. Friction fit was assessed after the 5th and 10th cycles. RESULTS: All groups demonstrated a progressive decrease in PE% with repeated tightening, except the RN interface, which showed transient torque exceeding applied tightening torque during the 2nd-3rd cycles. Bone-level (RC) assemblies exhibited greater variability and lower predictability compared with tissue-level (RN) configurations. Et/Er values remained relatively stable across cycles, although RC groups showed more pronounced energy loss and friction-fit-dependent deviations. Friction fit occurred exclusively in RC groups and significantly influenced Et/Er behavior. CONCLUSIONS: New assemblies generated higher PE% than those subjected to repeated cycles, with the exception of RN connections, which maintained superior preload stability and predictability. RC interfaces demonstrated lower and more variable PE% and energy profiles. Repeated tightening did not substantially reduce overall energy containment; however, friction fit altered torque-angle signatures and influenced mechanical performance. CLINICAL SIGNIFICANCE: Understanding preload decay and friction-fit effects in different implant platforms provides clinicians with guidance for selecting abutment types and recognizing platform-specific variations may help minimize screw loosening and improve long-term prosthetic stability.
Zitieren
APA
Guobis, Ž., Griškevičius, P., Mažeika, L., & Šliteris, R. (2026). Screw Preload Analysis in a Repeated Torque of Variobase Type Abutments. The International Journal of Prosthodontics, 1-35. https://doi.org/10.11607/ijp.9746
Vancouver
Guobis Ž, Griškevičius P, Mažeika L, Šliteris R. Screw Preload Analysis in a Repeated Torque of Variobase Type Abutments. The International Journal of Prosthodontics. 2026:1-35. doi:10.11607/ijp.9746
BibTeX
@article{Guobis2026,
author = {Guobis, Žygimantas and Griškevičius, Paulius and Mažeika, Liudas and Šliteris, Reimondas},
title = {Screw Preload Analysis in a Repeated Torque of Variobase Type Abutments},
journal = {The International Journal of Prosthodontics},
year = {2026},
pages = {1--35},
doi = {10.11607/ijp.9746}
}
EUVIMED