EUVIMEDSkopri EUVIMED
Crossref

Effect of Total Occlusal Convergence Angle and Rounded Preparations on the Marginal and Internal Fit of Incisor Monolithic Zirconia Crowns

Zeynep Özkurt Kayahan, Markus B Blatz, Yunus Emre Özden, Akanay Çopuroğlu, Esra Silahtar, Ender Kazazoğlu

The International Journal of Prosthodontics · 2026

DOI: 10.11607/ijp.9410 ↗

At a glance

Journal article in The International Journal of Prosthodontics, 2026. Written by Zeynep Özkurt Kayahan and 5 co-authors. Major MEDLINE topics: Zirconium, Crowns, Incisor, Dental Prosthesis Design.

AstrattSubjectsDettalji biblijografiċiCiteRelated studies

Abstract (original language)

PURPOSE: To evaluate the marginal and internal fit of anterior monolithic zirconia crowns fabricated over preparations with different total occlusal convergence (TOC) angles with and without a rounded incisal design. MATERIALS AND METHODS: Crown preparations of 14 maxillary central incisors were digitally designed and fabricated using photosensitive resin. The crowns were designed with axial wall inclinations of -8, -4, 0, 8, 12, 16, and 22 degrees with and without rounded incisal corners and a 1-mm-wide chamfer-type finish line. Monolithic zirconia crowns (n = 10) were milled and assessed for fit using the dual-scan technique using an intraoral scanner. The STL files were analyzed in Geomagic Control X, measuring fit at 100, 150, and 175 points on the incisal, axial, and marginal areas, respectively. Data normality was tested (Shapiro-Wilk), and TOC angle groups were compared using one-way ANOVA, Levene test, Tukey HSD, and independent samples t tests (P < .05). RESULTS: TOC angle groups showed statistically significantly differences (P < .001). The 22-degree preparation had the lowest marginal discrepancies (36 ± 5 μm rounded, 61 ± 5 μm nonrounded), while -8 degrees had the highest (117 ± 9 μm rounded, 147 ± 30 μm nonrounded). Axial discrepancies were lowest at 22 degrees (77 ± 14 μm) and highest at -8 degrees (208 ± 52 μm) in nonrounded samples (P < .001). The smallest incisal discrepancy was found in 22 degrees (95 ± 13 μm), while the largest (163 ± 31 μm) was at -4 degrees in the nonrounded groups (P < .001). CONCLUSIONS: TOC angle and rounded preparations have a significant impact on the fit of CAD/CAM-milled monolithic zirconia crowns. Rounded incisal corners and preparations with higher TOC angles increased marginal and internal adaptation of the crowns.

Subjects

MeSH terms (MEDLINE)

ZirconiumCrownsIncisorDental Prosthesis DesignDental Marginal AdaptationDental MaterialsTooth Preparation, ProsthodonticHumansComputer-Aided Design

Substances

Zirconiumzirconium oxideDental Materials

Cite

APA

Özkurt Kayahan, Z., Blatz, M. B., Özden, Y. E., Çopuroğlu, A., Silahtar, E., & Kazazoğlu, E. (2026). Effect of Total Occlusal Convergence Angle and Rounded Preparations on the Marginal and Internal Fit of Incisor Monolithic Zirconia Crowns. The International Journal of Prosthodontics. https://doi.org/10.11607/ijp.9410

Vancouver

Özkurt Kayahan Z, Blatz MB, Özden YE, Çopuroğlu A, Silahtar E, Kazazoğlu E. Effect of Total Occlusal Convergence Angle and Rounded Preparations on the Marginal and Internal Fit of Incisor Monolithic Zirconia Crowns. The International Journal of Prosthodontics. 2026. doi:10.11607/ijp.9410

BibTeX
@article{zkurtKayahan2026,
  author = {Özkurt Kayahan, Zeynep and Blatz, Markus B and Özden, Yunus Emre and Çopuroğlu, Akanay and Silahtar, Esra and Kazazoğlu, Ender},
  title = {Effect of Total Occlusal Convergence Angle and Rounded Preparations on the Marginal and Internal Fit of Incisor Monolithic Zirconia Crowns},
  journal = {The International Journal of Prosthodontics},
  year = {2026},
  doi = {10.11607/ijp.9410}
}
Start for free →