EUVIMEDEUVIMED entdecken
Vergleichsstudie

Comparative Evaluation of Surface Properties of Milled, 3D- Printed, and Conventional Denture Base Materials: Implications for Clinical Use

Farahnaz Nejatidanesh, Omid Savabi, Mohammad Khodaei, Maryam Gheisarifar, Yousef Mohseni Homagarani

The International Journal of Prosthodontics · 2025

DOI: 10.11607/ijp.9285 ↗

Kurz gefasst

Vergleichsstudie in der Zeitschrift The International Journal of Prosthodontics, 2025. Verfasst von Farahnaz Nejatidanesh und 4 weiteren Autor:innen. Hauptthemen laut MEDLINE: Denture Bases, Printing, Three-Dimensional, Dental Materials.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

PURPOSE: To compare surface wettability, roughness, porosity, and hardness of milled (IvoBase CAD), 3D-printed (DentaBase, a light-cured resin), and conventional (heat-polymerized/injection-molded) PMMA denture base materials to assess their clinical suitability. MATERIALS AND METHODS: A total of 40 specimens (15 × 10 × 3.3 mm) from four different types of denture base materials (IvoBase CAD, DentaBase 3D Printed, ProBase Hot Heat-Polymerized, and IvoBase High Impact Injection Molded Resin) were fabricated according to the manufacturer's instructions. Surface properties were evaluated using the sessile drop method to measure wettability, digital laser profilometer to measure surface roughness, the gravimetric method to measure porosity, and Vickers microhardness test to measure surface hardness. Statistical analyses were performed using ANOVA and a relative post hoc test (P ≤ .05). RESULTS: Milled and 3D-printed materials showed significantly lower roughness (0.15 to 0.12 μm) vs conventional groups (0.16 to 0.20 μm; P < .001). Wettability and hardness varied significantly (P < .001), with DentaBase exhibiting the highest hardness (23.94 VHN). Porosity did not differ (P = .633). CONCLUSIONS: Milled and 3D-printed resins demonstrated better surface properties, suggesting clinical advantages in reducing microbial adhesion and improving durability. However, heat-polymerized PMMA remains a viable option for specific applications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Denture BasesPrinting, Three-DimensionalDental MaterialsSurface PropertiesWettabilityPolymethyl MethacrylateMaterials TestingHardnessPorosityHumansHot TemperaturePolymerization

Substanzen

Polymethyl MethacrylateDental Materials

Zitieren

APA

Nejatidanesh, F., Savabi, O., Khodaei, M., Gheisarifar, M., & Homagarani, Y. M. (2025). Comparative Evaluation of Surface Properties of Milled, 3D- Printed, and Conventional Denture Base Materials: Implications for Clinical Use. The International Journal of Prosthodontics. https://doi.org/10.11607/ijp.9285

Vancouver

Nejatidanesh F, Savabi O, Khodaei M, Gheisarifar M, Homagarani YM. Comparative Evaluation of Surface Properties of Milled, 3D- Printed, and Conventional Denture Base Materials: Implications for Clinical Use. The International Journal of Prosthodontics. 2025. doi:10.11607/ijp.9285

BibTeX
@article{Nejatidanesh2025,
  author = {Nejatidanesh, Farahnaz and Savabi, Omid and Khodaei, Mohammad and Gheisarifar, Maryam and Homagarani, Yousef Mohseni},
  title = {Comparative Evaluation of Surface Properties of Milled, 3D- Printed, and Conventional Denture Base Materials: Implications for Clinical Use},
  journal = {The International Journal of Prosthodontics},
  year = {2025},
  doi = {10.11607/ijp.9285}
}
Kostenlos starten →