EUVIMEDAtrasti EUVIMED
Crossref

Impact of Extrinsic Staining on the Physical Properties Oof Provisional Resins Fabricated by Digital and Conventional Methods – An In Situ Study

Pedro Roberto Braz Rodrigues, Ana Lucia Caetano Pereira, Rocio Geng Vivanco, Fernanda de Carvalho Panzeri

The International Journal of Prosthodontics · 2025

DOI: 10.11607/ijp.9263 ↗

At a glance

Journal article in The International Journal of Prosthodontics, 2025. Written by Pedro Roberto Braz Rodrigues and 3 co-authors. Major MEDLINE topics: Dental Materials.

SantraukaSubjectsBibliografiniai duomenysCiteRelated studies

Abstract (original language)

PURPOSE: To evaluate, in situ, the color stability of a 3D-printed resin (PR), milled resin (MR), and bis-acryl resin (BR) after exposure to coffee and cigarette smoke. MATERIALS AND METHODS: The 12 participants per group (control, coffee consumers, and smokers) used intraoral devices containing the specimen resins. A total of 72 samples of each resin were prepared, and initial surface roughness and color readings were recorded. Participants wore the device, containing two samples of each resin, for 15 days, brushing three times per day. Final color and surface roughness measurements were obtained. Water sorption (SP) and water solubility (SL) analyses were conducted (n = 20). Data were analyzed using ANOVA and Tukey tests (α = .05). RESULTS: BR had the highest alterations in surface roughness under control conditions and after cigarette smoke exposure (P < .05). PR showed the highest surface roughness and MR the lowest alteration after coffee consumption (P < .05). After coffee consumption, BR exhibited higher color change than PR (P < .05), and following cigarette smoke exposure, BR showed the highest alteration (P < .05), while MR had the lowest (P < .05). Cigarette smoke caused the highest color change across all resins. BR exhibited the highest SP and SL (P < .05). CONCLUSIONS: PR and MR demonstrated better color stability and less alteration in surface roughness change compared to BR.

Subjects

MeSH terms (MEDLINE)

Dental MaterialsCoffeeSurface PropertiesHumansColorPrinting, Three-DimensionalSmokeAcrylic ResinsMaterials TestingMale

Substances

CoffeeSmokeAcrylic ResinsDental Materials

Cite

APA

Rodrigues, P. R. B., Pereira, A. L. C., Vivanco, R. G., & Panzeri, F. C. (2025). Impact of Extrinsic Staining on the Physical Properties Oof Provisional Resins Fabricated by Digital and Conventional Methods – An In Situ Study. The International Journal of Prosthodontics. https://doi.org/10.11607/ijp.9263

Vancouver

Rodrigues PRB, Pereira ALC, Vivanco RG, Panzeri FC. Impact of Extrinsic Staining on the Physical Properties Oof Provisional Resins Fabricated by Digital and Conventional Methods – An In Situ Study. The International Journal of Prosthodontics. 2025. doi:10.11607/ijp.9263

BibTeX
@article{Rodrigues2025,
  author = {Rodrigues, Pedro Roberto Braz and Pereira, Ana Lucia Caetano and Vivanco, Rocio Geng and Panzeri, Fernanda de Carvalho},
  title = {Impact of Extrinsic Staining on the Physical Properties Oof Provisional Resins Fabricated by Digital and Conventional Methods – An In Situ Study},
  journal = {The International Journal of Prosthodontics},
  year = {2025},
  doi = {10.11607/ijp.9263}
}
Start for free →