EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Color stability, roughness and topography of 3D printed, subtractive, and conventional acrylic resins

Luiza Freitas Brum Souza iD, Telma de Souza Pires iD, Priscila Pauli Kist iD, Natália de Freitas Daudt iD, Luiz Felipe Valandro iD, Rafael R Moraes iD, Mutlu Özcan iD, Gabriel Kalil Rocha Pereira iD

Brazilian Dental Journal · 2025

DOI: 10.1590/0103-644020256807 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Brazilian Dental Journal, 2025. Verfasst von Luiza Freitas Brum Souza und 7 weiteren Autor:innen. Beteiligte Einrichtung: Clinic for Masticatory Disorders and Dental Biomaterials, Center for Dental Medicine, University of Zurich, Zurich, Switzerland. Hauptthemen laut MEDLINE: Acrylic Resins, Printing, Three-Dimensional. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Brazilian National Council for Scientific and Technological Development, Brazilian Federal Agency for Coordination of Improvement of Higher Education Personnel, Research Foundation of the Rio Grande do Sul.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The aim of the study was to evaluate the color stability, translucency, roughness, and topography of acrylic resins fabricated through different methods. Discs (Ø=10 × 1.0 mm) of acrylic resins fabricated through different methods: 3D printing (PRINT), subtractive manufacturing (SUB), conventional pressing (PRESS Base and Tooth), and manual application against a mold (MOLD Base and Tooth). Acrylic resin disks (Ø= 10 mm × 1 mm thickness) were divided into six groups, corresponding to the different fabrication methods. Following preparation, the specimens were subjected to staining protocols using coffee (n= 6) and red wine (n= 6) solutions. Color coordinates (L*, a*, and b*) were recorded using a spectrophotometer (SP60; X-Rite) at baseline and after staining. Statistical analysis included color differences (∆E00) and translucency parameter differences (∆TP00), considering CIEDE2000 and acceptability (AT) and perceptibility thresholds (PT). Surface roughness was evaluated through Ra and Rz parameters. MOLD showed the most significant color alteration, particularly after red wine, indicating higher susceptibility to staining (p< 0.05). In contrast, SUB demonstrated superior color stability, while PRINT exhibited similar behavior to SUB and PRESS (p> 0.05), with potential for further improvements. In conclusion, processing techniques significantly affected the optical stability of acrylic resins. Manual application against a mold showed the most significant color change, especially with red wine, while the subtractive method achieved the best stability. 3D printing performed similarly to subtractive and pressing techniques, but still requires structural improvements. Smoother surfaces, as in pressing, enhanced resistance to staining, whereas rougher surfaces, as in manual application, increased susceptibility.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Acrylic ResinsPrinting, Three-DimensionalSurface PropertiesColorWineCoffeeSpectrophotometryMaterials Testing

Substanzen

Acrylic ResinsCoffee

Autor:innen und Institutionen

  • Clinic for Masticatory Disorders and Dental Biomaterials, Center for Dental Medicine, University of Zurich, Zurich, Switzerland.
  • 2 Post-Graduate Program in Oral Science, Faculty of Dentistry, Center for Development of Advanced Materials, Federal University of Santa Maria, Santa Maria, Brazil.
  • Post-Graduate Program in Mechanical Engineering, Faculty of Mechanical Engineering, Federal Federal University of Santa Maria, Santa Maria, Brazil.
  • Graduate Program in Dentistry, School of Dentistry, Universidade Federal de Pelotas, Pelotas, Brazil.

ORCID-Profile: Luiza Freitas Brum Souza, Telma de Souza Pires, Priscila Pauli Kist, Natália de Freitas Daudt, Luiz Felipe Valandro, Rafael R Moraes, Mutlu Özcan, Gabriel Kalil Rocha Pereira

Förderung

  • Brazilian National Council for Scientific and Technological Development
  • Brazilian Federal Agency for Coordination of Improvement of Higher Education Personnel
  • Research Foundation of the Rio Grande do Sul
  • Studies and Projects Foundation

Zitieren

APA

Souza, L. F. B., Pires, T. S., Kist, P. P., Daudt, N. F., Valandro, L. F., Moraes, R. R., Özcan, M., & Pereira, G. K. R. (2025). Color stability, roughness and topography of 3D printed, subtractive, and conventional acrylic resins. Brazilian Dental Journal. https://doi.org/10.1590/0103-644020256807

Vancouver

Souza LFB, Pires TS, Kist PP, Daudt NF, Valandro LF, Moraes RR, et al. Color stability, roughness and topography of 3D printed, subtractive, and conventional acrylic resins. Brazilian Dental Journal. 2025. doi:10.1590/0103-644020256807

BibTeX
@article{Souza2025,
  author = {Souza, Luiza Freitas Brum and Pires, Telma de Souza and Kist, Priscila Pauli and Daudt, Natália de Freitas and Valandro, Luiz Felipe and Moraes, Rafael R and Özcan, Mutlu and Pereira, Gabriel Kalil Rocha},
  title = {Color stability, roughness and topography of 3D printed, subtractive, and conventional acrylic resins},
  journal = {Brazilian Dental Journal},
  year = {2025},
  doi = {10.1590/0103-644020256807}
}
Kostenlos starten →