EUVIMEDEUVIMED entdecken
Crossref

Effects of Toothbrushing and Thermocycling on Color, Opalescence, Fluorescence, and Surface Analyses of Stained CAD-CAM Glass-ceramics and Zirconia

Bruno Arruda Mascaro, Giovana Pompeu Parrilha, Rafael de Pauli Santos, José Maurício Dos Santos Nunes Reis

The International Journal of Prosthodontics · 2025

DOI: 10.11607/ijp.9231 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Prosthodontics, 2025. Verfasst von Bruno Arruda Mascaro und 3 weiteren Autor:innen. Hauptthemen laut MEDLINE: Ceramics, Zirconium, Computer-Aided Design, Toothbrushing.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

PURPOSE: To assess the impact of toothbrushing and thermocycling on color, opalescence, fluorescence, and surface of extrinsically stained CAD/CAM ceramics. MATERIALS AND METHODS: Specimens (n = 20) of VITA Mark II (VBII), VITA Suprinity (SUP), and IPS e.max ZirCAD (ZIR) were stained and glazed, then divided into two groups based on dentifrice (n = 10; conventional or whitening). Aging was simulated via 100,000 toothbrushing cycles followed by 12,000 cycles of thermocycling. Color differences (ΔE00) and opalescence were calculated. Images under ultraviolet (UV) lamp were obtained for fluorescence analysis. Surface roughness was analyzed using 3D laser confocal microscopy, and chemical elemental characterization was determined using energy-dispersive X-ray spectroscopy (XEDS). Statistical analyses (α = .05) included two-way ANOVA and Tukey HSD tests for ΔE00 and three-way ANOVAs with Sidak post hoc test for opalescence, fluorescence, and surface roughness. ΔE00 values were compared to perceptibility and acceptability thresholds. RESULTS: Higher ΔE00 were observed for VBII in the whitening group and SUP in the conventional group. All ΔE00 values remained below perceptibility. ZIR exhibited the lowest opalescence and fluorescence before and after aging. SUP and ZIR showed a significant reduction but continued to exhibit fluorescence after aging. VBII whitening and SUP conventional exhibited increased roughness. XEDS indicated that extrinsic characterization persisted on the surface with subtle changes in elemental composition after aging. CONCLUSIONS: The findings suggest that toothbrushing with different dentifrices and thermocycling can impact the esthetic outcome and surface of stained CAD/CAM ceramics. Despite these, the materials evaluated maintained color stability and resisted the proposed aging.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

CeramicsZirconiumComputer-Aided DesignToothbrushingDental PorcelainSurface PropertiesColorFluorescenceDentifricesMaterials TestingMicroscopy, ConfocalTemperature

Substanzen

Zirconiumzirconium oxideGlass ceramicsDental PorcelainDentifricesVITA SuprinityVita Mark II

Zitieren

APA

Mascaro, B. A., Parrilha, G. P., Santos, R. P., & Dos Santos Nunes Reis, J. M. (2025). Effects of Toothbrushing and Thermocycling on Color, Opalescence, Fluorescence, and Surface Analyses of Stained CAD-CAM Glass-ceramics and Zirconia. The International Journal of Prosthodontics. https://doi.org/10.11607/ijp.9231

Vancouver

Mascaro BA, Parrilha GP, Santos RP, Dos Santos Nunes Reis JM. Effects of Toothbrushing and Thermocycling on Color, Opalescence, Fluorescence, and Surface Analyses of Stained CAD-CAM Glass-ceramics and Zirconia. The International Journal of Prosthodontics. 2025. doi:10.11607/ijp.9231

BibTeX
@article{Mascaro2025,
  author = {Mascaro, Bruno Arruda and Parrilha, Giovana Pompeu and Santos, Rafael de Pauli and Dos Santos Nunes Reis, José Maurício},
  title = {Effects of Toothbrushing and Thermocycling on Color, Opalescence, Fluorescence, and Surface Analyses of Stained CAD-CAM Glass-ceramics and Zirconia},
  journal = {The International Journal of Prosthodontics},
  year = {2025},
  doi = {10.11607/ijp.9231}
}
Kostenlos starten →