EUVIMEDEUVIMED entdecken
Systematische Übersicht

Influence of Printing Angle on The Physico-Mechanical Properties of PMMA-Based Resins for Dental Use: A Systematic Review of in Vitro Studies

Victor de Melo Soares, Andréa Cândido Dos Reis, Mariana Lima da Costa Valente

The International Journal of Prosthodontics · 2025

DOI: 10.11607/ijp.9169 ↗

Kurz gefasst

Systematische Übersicht in der Zeitschrift The International Journal of Prosthodontics, 2025. Verfasst von Victor de Melo Soares und 2 weiteren Autor:innen. Hauptthemen laut MEDLINE: Polymethyl Methacrylate, Dental Materials, Printing, Three-Dimensional, Printing. Die Arbeit wurde bisher 2-mal zitiert (Crossref).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

PURPOSE: To investigate the influence of the printing angle on the physicomechanical properties of PMMA. MATERIALS AND METHODS: This systematic review included the Preferred Reporting Items for Systematic Review and Meta-Analysis (PRISMA 2020) and was registered with the Open Science Framework. Electronic searches were carried out in the PubMed/MEDLINE, SciELO, Scopus, Embase, and Science Direct databases. Risk of bias was analyzed using the Joanna Briggs Institute (JBI) instrument for quasiexperimental studies. RESULTS: Of the 1,917 studies identified, 25 were included and qualitatively assessed after the selection stages. Printing dental devices for prosthetic use in PMMA-based resins provides satisfactory performance, with better resistance to bending and fracture at 0 degrees. After polishing, the differences observed in surface roughness concerning the printing angle became insignificant. The different printing angles can influence the optical properties significantly, but other factors such as the composition of the resin can also influence these results. CONCLUSIONS: Printing dental devices in PMMA-based resins provides satisfactory performance for prosthetic use. In general, better mechanical performance was attributed to a printing angle of 0 degrees compared to 45 and 90 degrees. Varying the printing angle can be a strategy for individualizing prosthetic devices according to the physical and mechanical needs presented by each type of clinical application.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Polymethyl MethacrylateDental MaterialsPrinting, Three-DimensionalPrintingHumansSurface PropertiesIn Vitro TechniquesMaterials Testing

Substanzen

Polymethyl MethacrylateDental Materials

Zitieren

APA

Soares, V. M., Dos Reis, A. C., & da Costa Valente, M. L. (2025). Influence of Printing Angle on The Physico-Mechanical Properties of PMMA-Based Resins for Dental Use: A Systematic Review of in Vitro Studies. The International Journal of Prosthodontics. https://doi.org/10.11607/ijp.9169

Vancouver

Soares VM, Dos Reis AC, da Costa Valente ML. Influence of Printing Angle on The Physico-Mechanical Properties of PMMA-Based Resins for Dental Use: A Systematic Review of in Vitro Studies. The International Journal of Prosthodontics. 2025. doi:10.11607/ijp.9169

BibTeX
@article{Soares2025,
  author = {Soares, Victor de Melo and Dos Reis, Andréa Cândido and da Costa Valente, Mariana Lima},
  title = {Influence of Printing Angle on The Physico-Mechanical Properties of PMMA-Based Resins for Dental Use: A Systematic Review of in Vitro Studies},
  journal = {The International Journal of Prosthodontics},
  year = {2025},
  doi = {10.11607/ijp.9169}
}
Kostenlos starten →