EUVIMEDDescubrir EUVIMED
Vergleichsstudie

Comparison of the Marginal and Internal Fit of Ceramic Laminate Veneers Fabricated with Four Different Computer-Aided Manufacturing Techniques

Nguyen Viet Anh, Vo Truong Nhu Ngoc, Tong Minh Son, Hoang Viet Hai, Nguyen Thu Tra

The International Journal of Prosthodontics · 2024

DOI: 10.11607/ijp.8920 ↗

At a glance

Vergleichsstudie in The International Journal of Prosthodontics, 2024. Written by Nguyen Viet Anh and 4 co-authors. Major MEDLINE topics: Dental Veneers, Computer-Aided Design, Dental Porcelain, Ceramics. Cited 3 times so far (Crossref).

ResumenSubjectsDatos bibliográficosCiteRelated studies

Abstract (original language)

PURPOSE: Improvements in CAD/CAM have changed the methods of fabricating laminate veneers. The objective of this study was to evaluate the marginal and internal fit of ceramic veneers manufactured with different CAD/CAM techniques. MATERIALS AND METHODS: A metal die was made by copying and scanning a prepared plastic maxillary right central incisor to design a laminate veneer. In total, 100 laminate veneers were made with four different CAD/CAM techniques (n = 25), including milled lithium disilicate (MLD), heat-pressed lithium disilicate (PLD) with 3D-printed wax patterns, milled zirconia (MZ), and 3D-printed zirconia (PZ). The virtual marginal and internal fit of fabricated veneers was evaluated with digital crown-fitting software. The actual marginal and internal fit was measured with the silicone replica method under a digital microscope. The measured data were analyzed using one-way ANOVA and Tukey tests. RESULTS: There were significant differences in marginal and internal fit (P < .001) among manufacturing techniques. Both the virtual and actual marginal and internal gaps were higher in the PLD and PZ groups compared to the MLD and MZ groups. CONCLUSIONS: All four CAD/CAM techniques for manufacturing veneers-MLD, PLD with 3D printed wax patterns, MZ, and PZ-have clinically acceptable marginal and internal fit. MZ and MLD veneers demonstrated superior marginal and internal fit compared to PZ and PLD veneers with 3D-printed wax patterns.

Subjects

MeSH terms (MEDLINE)

Dental VeneersComputer-Aided DesignDental PorcelainCeramicsDental Prosthesis DesignDental Marginal AdaptationHumansPrinting, Three-DimensionalZirconium

Substances

Dental Porcelainlithia disilicatezirconium oxideZirconium

Cite

APA

Anh, N. V., Ngoc, V. T. N., Son, T. M., Hai, H. V., & Tra, N. T. (2024). Comparison of the Marginal and Internal Fit of Ceramic Laminate Veneers Fabricated with Four Different Computer-Aided Manufacturing Techniques. The International Journal of Prosthodontics. https://doi.org/10.11607/ijp.8920

Vancouver

Anh NV, Ngoc VTN, Son TM, Hai HV, Tra NT. Comparison of the Marginal and Internal Fit of Ceramic Laminate Veneers Fabricated with Four Different Computer-Aided Manufacturing Techniques. The International Journal of Prosthodontics. 2024. doi:10.11607/ijp.8920

BibTeX
@article{Anh2024,
  author = {Anh, Nguyen Viet and Ngoc, Vo Truong Nhu and Son, Tong Minh and Hai, Hoang Viet and Tra, Nguyen Thu},
  title = {Comparison of the Marginal and Internal Fit of Ceramic Laminate Veneers Fabricated with Four Different Computer-Aided Manufacturing Techniques},
  journal = {The International Journal of Prosthodontics},
  year = {2024},
  doi = {10.11607/ijp.8920}
}
Start for free →