EUVIMEDEUVIMED entdecken
Crossref

INFLUENCE OF CERAMIC MATERIALS AND PREPARATION DESIGNS ON THE MARGINAL ADAPTATION OF INLAYS AND ONLAYS AFTER THERMOCYCLING

Mahmoud Attia, Aya A Salama

The International Journal of Prosthodontics · 2024

DOI: 10.11607/ijp.8504 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Prosthodontics, 2024. Verfasst von Mahmoud Attia und 1 weiteren Autor:innen. Hauptthemen laut MEDLINE: Inlays, Dental Marginal Adaptation, Dental Porcelain, Ceramics. Die Arbeit wurde bisher 2-mal zitiert (Crossref).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

PURPOSE: To evaluate inlay and onlay marginal adaptation of two different ceramic materials using two intracoronal preparation designs. MATERIALS AND METHODS: An examination of the marginal adaptation of two materials-lithium disilicate (LD; IPS e.max CAD) and polymer infiltrated ceramic network material (PICN; Vita Enamic)-and two preparation designs, where D1 represents MOD inlay preparation with no cusp reduction and for D2, in addition to the basic MOD preparation, the buccal cusps (functional cusps) were reduced by 1.5 mm. Four sub-groups (LD-D1, LD-D2, PICN-D1, PICN-D2) were conducted. In total, 40 (n = 40) mandibular molars were used. A stereomicroscope was used to assess the marginal gap before, after cementation and after thermocycling. Values were calculated for the mean, median, SD, minimum, maximum, and 95% CI. Pairwise comparisons using Tukey post-hoc test were performed following an ANOVA significance of P ≤ .05. RESULTS: The results revealed that lithium disilicate showed statistically significantly higher mean gap distance than PICN material (61 μm to 99 μm). Pairwise comparisons showed that D2 design has statistically significant higher mean gap values than D1. CONCLUSIONS: Both LD and PICN material provided marginal adaptation within clinical accepted range. PICN material restorations provided better fit than lithium disilicate restorations. Cusp coverage has a greater marginal gap compared to conventional preparation.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

InlaysDental Marginal AdaptationDental PorcelainCeramicsDental Prosthesis DesignHumansMaterials TestingIn Vitro TechniquesDental Materials

Stichwörter der Autor:innen

Glass Ceramic; Hybrid Ceramic; Marginal gap; Partial coverage.

Substanzen

Dental Porcelainlithia disilicateVITA EnamicDental MaterialsIPS e.max CAD LT

Zitieren

APA

Attia, M., & Salama, A. A. (2024). INFLUENCE OF CERAMIC MATERIALS AND PREPARATION DESIGNS ON THE MARGINAL ADAPTATION OF INLAYS AND ONLAYS AFTER THERMOCYCLING. The International Journal of Prosthodontics. https://doi.org/10.11607/ijp.8504

Vancouver

Attia M, Salama AA. INFLUENCE OF CERAMIC MATERIALS AND PREPARATION DESIGNS ON THE MARGINAL ADAPTATION OF INLAYS AND ONLAYS AFTER THERMOCYCLING. The International Journal of Prosthodontics. 2024. doi:10.11607/ijp.8504

BibTeX
@article{Attia2024,
  author = {Attia, Mahmoud and Salama, Aya A},
  title = {INFLUENCE OF CERAMIC MATERIALS AND PREPARATION DESIGNS ON THE MARGINAL ADAPTATION OF INLAYS AND ONLAYS AFTER THERMOCYCLING},
  journal = {The International Journal of Prosthodontics},
  year = {2024},
  doi = {10.11607/ijp.8504}
}
Kostenlos starten →