Impact of Preparation Thickness and Restorative Material on the Marginal Fit of CAD‐CAM Complete Crowns
International Journal of Dentistry · 2026-01 · 2026 (1)
DOI: 10.1155/ijod/3935712 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Dentistry, online erschienen am 14.07.2026. Verfasst von Éric Arnold Dos Santos Brito und 4 weiteren Autor:innen. Beteiligte Einrichtung: Postgraduate Program in Oral Rehabilitation at the School of Dentistry of Ribeirão Preto, University of São Paulo (FORP-USP), Ribeirão Preto, São Pau…. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Statement of Problem A lack of consensus exists on whether the preparation thickness and choice of restorative material can affect the marginal adaptation of complete CAD‐CAM crowns.
Purpose
To evaluate the impact of preparation thickness and restorative material on the marginal adaptation of CAD‐CAM complete crowns. Materials and Methods Two human mandibular right second molars were prepared with the following characteristics: conventional preparation (CP)—1.0 mm chamfer, 2 mm reduction of the occlusal surface, ~6° convergence angle, and 1.5 mm axial reduction; ultrathin preparation (UFP)—0.5 mm finish line, 0.7 mm reduction of the occlusal and axial surface. The teeth were scanned using an intraoral scanner (IOs), and the crowns were designed and milled. Ten crowns were produced in each group ( n = 10): feldspathic ceramic (FC), resin composite (RC), lithium silicate ceramic reinforced with zirconia (LSZ), and lithium disilicate ceramic (LDS). The marginal gap was analyzed at 4 points using a stereomicroscope. Data analysis used two‐way analysis of variance (ANOVA) and the Tukey test ( α = 0.05).
Results
CP (65.00 ± 16.62 to 84.22 ± 20.87 µm) showed the lowest marginal discrepancy values, with a statistical difference from UFP (110.40 ± 28.64 to 183.83 ± 40.23 µm). In the CP group, there was no statistically significant difference between the materials. In the UFP, there was a difference between FC and RC compared to LSZ and LDS.
Conclusions
The preparation’s thickness impacted the marginal adaptation of CAD‐CAM full crowns, and the CP showed a lower discrepancy compared to the ultrathin preparation. The performance of the materials in the CP was similar. However, there was better marginal adaptation of FC crowns and RCs in ultrathin preparations.
Autor:innen und Institutionen
- Postgraduate Program in Oral Rehabilitation at the School of Dentistry of Ribeirão Preto, University of São Paulo (FORP-USP), Ribeirão Preto, São Paulo, Brazil.
- Department of Dentistry, Bahiana School of Medicine and Public Health (EBMSP), Salvador, Bahia, Brazil, bahiana.edu.br.
- Department of Dentistry, Feira de Santana State University (UEFS), Feira de Santana, Bahia, Brazil, uefs.br.
- Department of Dental Clinic, University of Bahia (FOUFBA), Salvador, Bahia, Brazil.
ORCID-Profile: Éric Arnold Dos Santos Brito, Thayara Coelho Metzker, Ingrid Bandeira Sanches, Adriana Oliveira Carvalho, Emilena Maria Castor Xisto Lima
Zitieren
APA
Arnold Dos Santos Brito, É., Metzker, T. C., Sanches, I. B., Carvalho, A. O., & Lima, E. M. C. X. (2026). Impact of Preparation Thickness and Restorative Material on the Marginal Fit of CAD‐CAM Complete Crowns. International Journal of Dentistry, 2026(1). https://doi.org/10.1155/ijod/3935712
Vancouver
Arnold Dos Santos Brito É, Metzker TC, Sanches IB, Carvalho AO, Lima EMCX. Impact of Preparation Thickness and Restorative Material on the Marginal Fit of CAD‐CAM Complete Crowns. International Journal of Dentistry. 2026;2026(1). doi:10.1155/ijod/3935712
BibTeX
@article{ArnoldDosSantosBrito2026,
author = {Arnold Dos Santos Brito, Éric and Metzker, Thayara Coelho and Sanches, Ingrid Bandeira and Carvalho, Adriana Oliveira and Lima, Emilena Maria Castor Xisto},
title = {Impact of Preparation Thickness and Restorative Material on the Marginal Fit of CAD‐CAM Complete Crowns},
journal = {International Journal of Dentistry},
year = {2026},
volume = {2026},
number = {1},
doi = {10.1155/ijod/3935712}
}
EUVIMED