EUVIMEDEUVIMED entdecken
Systematische ÜbersichtOpen Access · CC BY 4.0

3D Printing of Bone Substitutes Based on Vat Photopolymerization Processes: A Systematic Review

Simon Enbergs iD, Jacob Spinnen iD, Tilo Dehne iD, Michael Sittinger

Journal of Tissue Engineering and Regenerative Medicine · 2023

DOI: 10.1155/2023/3901448 ↗

Kurz gefasst

Systematische Übersicht in der Zeitschrift Journal of Tissue Engineering and Regenerative Medicine, 2023. Verfasst von Simon Enbergs und 3 weiteren Autor:innen. Beteiligte Einrichtung: Tissue Engineering Laboratory, BIH Center of Regenerative Therapies, Department of Rheumatology & Clinical Immunology, Charité-Universitätsmedizin Be…. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Bone Substitutes, Polymerization, Photochemical Processes. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 102 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union Framework Program, Projekt DEAL.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Treatment options for critically sized bone defects are currently limited to metal osteosynthesis, autologous bone grafting, or calcium-based implants to bridge the gap. Additive manufacturing techniques pose a possible alternative. The light-basedthree-dimensional printing process of vat photopolymerization (VP) is of particular interest since it enables the printing of complex scaffold architectures at high resolution. This review compares multiple vat photopolymerization processes as well as the employed resin components’ interactions with musculoskeletal cells and tissue. The results show an outstanding printing capability, exceeding the potential of other printing methods. However, despite the availability of various biocompatible materials, neither the mechanical strength of bone nor the scale necessary for clinical application has been achieved so far when relying on single material constructs. One possible solution is the development of adaptive hybrid constructs produced with multimaterial VP.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalBone SubstitutesPolymerizationPhotochemical ProcessesHumansAnimalsTissue ScaffoldsTissue EngineeringBiocompatible Materials

Substanzen

Bone SubstitutesBiocompatible Materials

Autor:innen und Institutionen

  • Tissue Engineering Laboratory, BIH Center of Regenerative Therapies, Department of Rheumatology & Clinical Immunology, Charité-Universitätsmedizin Berlin, Charitéplatz 1, Berlin 10117, Germany.

ORCID-Profile: Simon Enbergs, Jacob Spinnen, Tilo Dehne

Förderung

  • European Union Framework Program
  • Projekt DEAL

Zitieren

APA

Enbergs, S., Spinnen, J., Dehne, T., & Sittinger, M. (2023). 3D Printing of Bone Substitutes Based on Vat Photopolymerization Processes: A Systematic Review. Journal of Tissue Engineering and Regenerative Medicine. https://doi.org/10.1155/2023/3901448

Vancouver

Enbergs S, Spinnen J, Dehne T, Sittinger M. 3D Printing of Bone Substitutes Based on Vat Photopolymerization Processes: A Systematic Review. Journal of Tissue Engineering and Regenerative Medicine. 2023. doi:10.1155/2023/3901448

BibTeX
@article{Enbergs2023,
  author = {Enbergs, Simon and Spinnen, Jacob and Dehne, Tilo and Sittinger, Michael},
  title = {3D Printing of Bone Substitutes Based on Vat Photopolymerization Processes: A Systematic Review},
  journal = {Journal of Tissue Engineering and Regenerative Medicine},
  year = {2023},
  doi = {10.1155/2023/3901448}
}
Kostenlos starten →