EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Vat photo-polymerization 3D printing of gradient scaffolds for osteochondral tissue regeneration

Federica Corrado, Luciano Di Maio, Paola Palmero, Bartolomeo Coppola, Zahid Abbas, Annalisa La Gatta, Chiara Schiraldi, Paola Scarfato

Acta Biomaterialia · 2025-06 · 200 · 67-86

DOI: 10.1016/j.actbio.2025.05.042 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Acta Biomaterialia, 2025-06. Verfasst von Federica Corrado und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II n. 132, 84084 Fisciano, SA, Italy. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Tissue Scaffolds, Tissue Engineering, Polymerization. Die Arbeit wurde bisher 31-mal zitiert (Crossref) und nennt 163 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministero dell’Istruzione, dell’Università e della Ricerca, European Commission, Ministero dell'Università e della Ricerca.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In recent decades, osteochondral (OC) tissue regeneration has been one of the major challenges in regenerative medicine. The absence of blood vessels, lymphatic vessels, and nerves in OC tissue prevents self-repair, while the structural complexity and differences between bone and cartilage layers make conventional surgical treatments largely ineffective. To address this issue, tissue engineering has emerged as a promising approach to replacing damaged OC tissue, with a particular focus on innovative strategies such as the design of continuous gradient scaffolds that mimic the complex architecture of native OC tissue. In this review vat photopolymerization (VPP) 3D printing technologies are presented as one of the most effective methods for fabricating gradient scaffolds for OC tissue repair. By leveraging photochemical reactions and light-assisted techniques, such as digital light processing (DLP), stereolithography (SLA) and two-photon polymerization (2-PP), highly precise porous structures made of biocompatible photo-crosslinkable resins have been successfully fabricated, with several relevant examples reported herein. DLP, SLA and 2-PP have proven fundamental in creating compositional, architectural, and mechanical gradients within scaffolds. Moreover, scaffold functionalization with bioactive molecules has demonstrated effectiveness in repairing damaged OC tissue in both in vitro and in vivo conditions. Moreover, the adoption of modeling tools such as the design of experiments (DoE) approach and AI-driven computational methods has proven to be valuable in optimizing the fabrication process and enhancing scaffold designs to more closely replicate the architecture and functionality of osteochondral tissues. STATEMENT OF SIGNIFICANCE: Despite the transformative potential of vat photopolymerization (VPP) techniques, such as stereolithography (SLA) and digital light processing (DLP), for developing high-precision gradient 3D scaffolds for osteochondral (OC) tissue repair, achieving full biomimetic restoration remains a significant challenge. This review offers a comprehensive analysis of advancements in VPP, detailing how these techniques enable precise control over scaffold composition, architecture, and mechanical properties to closely replicate the complex structure of OC tissue. Furthermore, it underscores the critical need for standardized protocols and long-term evaluations in scaffold development. Addressing these gaps is essential to advancing the clinical translation of VPP-based scaffolds, paving the way for more effective treatments for OC tissue damage.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalTissue ScaffoldsTissue EngineeringPolymerizationRegenerationPhotochemical ProcessesHumansAnimals

Stichwörter der Autor:innen

Digital light processingGradient scaffoldsOsteochondral tissue regenerationStereolithographyVat photopolymerization

Autor:innen und Institutionen

  • Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II n. 132, 84084 Fisciano, SA, Italy.
  • Department of Applied Science and Technology, Politecnico di Torino, INSTM R.U. Lince Laboratory, Corso Duca degli Abruzzi n. 24, 10129 Torino, Italy.
  • Department of Experimental Medicine, Section of Biotechnology, University of Campania "Luigi Vanvitelli", Via Santa Maria di Costantinopoli n.16, 80138 Napoli, Italy.
  • Department of Civil Engineering, University of Salerno, Via Giovanni Paolo II n. 132, 84084 Fisciano, SA, Italy. Electronic address: pscarfato@unisa.it.

Förderung

  • Ministero dell’Istruzione, dell’Università e della Ricerca
  • European Commission
  • Ministero dell'Università e della Ricerca
  • Ministry of Education, University and Research

Zitieren

APA

Corrado, F., Di Maio, L., Palmero, P., Coppola, B., Abbas, Z., La Gatta, A., Schiraldi, C., & Scarfato, P. (2025). Vat photo-polymerization 3D printing of gradient scaffolds for osteochondral tissue regeneration. Acta Biomaterialia, 200, 67-86. https://doi.org/10.1016/j.actbio.2025.05.042

Vancouver

Corrado F, Di Maio L, Palmero P, Coppola B, Abbas Z, La Gatta A, et al. Vat photo-polymerization 3D printing of gradient scaffolds for osteochondral tissue regeneration. Acta Biomaterialia. 2025;200:67-86. doi:10.1016/j.actbio.2025.05.042

BibTeX
@article{Corrado2025,
  author = {Corrado, Federica and Di Maio, Luciano and Palmero, Paola and Coppola, Bartolomeo and Abbas, Zahid and La Gatta, Annalisa and Schiraldi, Chiara and Scarfato, Paola},
  title = {Vat photo-polymerization 3D printing of gradient scaffolds for osteochondral tissue regeneration},
  journal = {Acta Biomaterialia},
  year = {2025},
  volume = {200},
  pages = {67--86},
  doi = {10.1016/j.actbio.2025.05.042}
}
Kostenlos starten →