Impact of Nanoparticles Additions on the Strength of Dental Composite Resin
International Journal of Biomaterials · 05.07.2022 · 2022 · 1-9
DOI: 10.1155/2022/1165431 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Biomaterials, erschienen am 05.07.2022. Verfasst von Emad Azmy und 4 weiteren Autor:innen. Beteiligte Einrichtung: Elmarg Students' Clinic, General Authority of Health Insurance, Western Elmarg Area, Cairo, Egypt. Die Arbeit wurde bisher 59-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Objective
This study aimed to evaluate the effect of nanoparticles, zirconium dioxide (ZrO2), titanium dioxide (TiO2), and silicon dioxide (SiO2), on flexural strength (FS), hardness, and wear resistance of light cured dental composite resin. Materials and Methods. 210 rectangular and disc-shaped composite resin specimens were fabricated with dimensions (25 × 2 × 2 ± 0.03 mm) and (6×4 ± 0.03 mm) for FS, hardness, and wear resistance, respectively (70/test). Specimens of each test were divided according to nanofillers into four groups, unmodified as control, ZrO2 (Z), TiO2 (T), and SiO2 (S) groups; each one was further subdivided into two subgroups according to nanoparticles concentration, 3wt.% and 7wt.% (Z3, Z7, T3, T7, S3, and S7), 10 specimens of each subgroup. A3-point bending test and Vickers hardness test were used for FS and hardness measurements, respectively. Wear resistance was evaluated by the differences in surface roughness of tested specimens before and after wear test. Two-way and 1-way ANOVA and Bonferroni’s post hoc tests were done for data analysis (α = 0.05).
Results
Two-way ANOVA for FS and wear resistance showed that there was a significant interaction between type of nanoparticles and concentration of nanoparticles ( p < 0.001 ) while two-way ANOVA for hardness showed that both type of nanoparticles and concentration of nanoparticles had a significant effect ( p < 0.001 ), while the effect of their interaction was not statistically significant ( p = 0.142 ). 1-way-ANOVA test showed significant increase in FS and wear resistance for all tested groups ( p < 0.001 and p < 0.001 , respectively) except T7 and S7. Also, there was a significant enhancement in hardness for all tested groups ( p < 0.001 ).
Conclusion
Modification of light cured composite resin with certain amounts of nanoparticles (3% and 7% of ZrO2 and 3% of TiO2 and SiO2) can be beneficial in improving flexural strength and wear resistance while hardness of composite resin was increased with all NPs additions.
Autor:innen und Institutionen
- Elmarg Students' Clinic, General Authority of Health Insurance, Western Elmarg Area, Cairo, Egypt.
- Department of Removable Prosthodontics, Faculty of Dental Medicine, Al-Azhar University, Cairo, Egypt.
- Department of Fixed Prosthodontics, Faculty of Dentistry, Cairo University, Cairo, Egypt.
- Department of Oral and Maxillofacial Surgery, Faculty of Dentistry, Umm Al Qura University, Makkah, Saudi Arabia.
- Department of Endodontics, Faculty of Dentistry, Cairo University, Cairo, Egypt.
- Conservative and Restorative Dentistry Department, Faculty of Dentistry, Umm Al Qura University, Makkah, Saudi Arabia.
ORCID-Profile: Emad Azmy, Mohamed Reda Zaki Al-Kholy, Mohamed Fattouh, Laila Mohamed Mohamed Kenawi, Mohamed Ahmed Helal
Zitieren
APA
Azmy, E., Al-Kholy, M. R. Z., Fattouh, M., Kenawi, L. M. M., & Helal, M. A. (2022). Impact of Nanoparticles Additions on the Strength of Dental Composite Resin. International Journal of Biomaterials, 2022, 1-9. https://doi.org/10.1155/2022/1165431
Vancouver
Azmy E, Al-Kholy MRZ, Fattouh M, Kenawi LMM, Helal MA. Impact of Nanoparticles Additions on the Strength of Dental Composite Resin. International Journal of Biomaterials. 2022;2022:1-9. doi:10.1155/2022/1165431
BibTeX
@article{Azmy2022,
author = {Azmy, Emad and Al-Kholy, Mohamed Reda Zaki and Fattouh, Mohamed and Kenawi, Laila Mohamed Mohamed and Helal, Mohamed Ahmed},
title = {Impact of Nanoparticles Additions on the Strength of Dental Composite Resin},
journal = {International Journal of Biomaterials},
year = {2022},
volume = {2022},
pages = {1--9},
doi = {10.1155/2022/1165431}
}
EUVIMED